The point gap on a Yamaha DT250 typically refers to the gap between the ignition points in the magneto system, which should be set to approximately 0. points when the points are fully open. This gap is crucial for proper ignition timing and engine performance. Always refer to the specific service manual for your bike’s model year for the exact specifications.
If its anything like a DT250, try .015 point gap 3.5mm btdc, use a multimeter frame to black wire on mag harness (unplugged) to check continuity (ohms, 0 @ 3.5mm btdc is right where you need it) You will need a plug feeler to properly set it. Setting the gap means nothing alone.
1000 cc
The magneto point gap on a 2hp Yamaha outboard is 0.35mm, or 0.014".
what is the valve gap for a 1999 Yamaha woverine
Hello: The point gap on a DT125 is basically the same as all bikes//////.012" thru .016"///////.014 inches is a good place to set them at.....Good Luck****
The point gap on a 1975 Yamaha YZ80 is typically set to 0.016 inches (0.4 mm). This gap is crucial for proper ignition timing and the overall performance of the engine. It's important to check and adjust this gap to ensure optimal engine operation and prevent starting or running issues. Always refer to the specific service manual for the most accurate specifications.
Suggest you call a Yamaha dealer for info.
What is the spark plug gap for a 2006 yamaha ttr 125?
The 1980 Yamaha Enduro models typically feature a five-speed transmission. This includes models like the Yamaha DT175 and DT250, which were popular during that era. The five-speed gearbox allows for a good balance of power and control on various terrains.
the gap is .030"
The suggested spark plug gap on a 1997 Yamaha YZ 80 is .036. That is the standard gap for most Yamaha small engines.
The spark plug gap for a 1994 Yamaha YZ250 should be .024 inches. A Yamaha YZ250 is a 249cc motorcycle.