Type your answer here... 18
points
on the left side of the engine ther is a plug in the middle remove plug rotate engine until you see a line that's tdc
To mount a regulator on a 1972 Harley Davidson Ironhead, you will first need to locate the mounting points on the frame or the engine. Once located, use appropriate bolts and nuts to secure the regulator in place. Make sure to connect the wiring harness correctly to ensure proper functioning of the regulator.
1958 for the rear and 1972 for the front.
its a 1972
1980
first i need to know which model i have some or you can purchase a clymers manual #m420
A 1972 Harley-Davidson Sportster typically takes about 3 quarts (approximately 2.8 liters) of engine oil when performing an oil change, including the oil filter. It's important to check the owner's manual for specific recommendations and ensure the oil level is within the designated range on the dipstick after filling. Always use the appropriate oil type, usually 20W-50, for optimal performance.
John Davidson with Love - 1972 TV was released on: USA: 24 October 1972
J. Norman Davidson died in 1972.
I know the 1973 FLH had these colours: Black, sparkling purple, sparkling burgundy, sparkling blue, sparkling red, sparkling turquoise and Finally sparkling America (red white and blue). i owned a 72 decker.it was harley blue and white
Look in a book called "Tech-Tips" put out by Easyrider Magazine, there is a simple wiring diagram that I once used on my 72 XLCH it consist of about 6 wires.