0
What else can I help you with?
What is the chain size of a 025 stihl saw?
The chain size of a Stihl 025 chainsaw typically uses a 3/8" pitch chain with a .050" gauge. The specific model often employs a bar length of 16 to 18 inches, which can also influence the chain type. Always check the owner's manual or the specifications on the chainsaw for the exact chain size and compatibility.
Need service manual stihl 025 chainsaw thanks?
http://lawnandgarden.owneriq.net/manuals/mfg/stihl/025.html
Stihl where was the stihl 026 made?
What is the part number of the sprocket of stihl 025 ?
What are the specs for a Stihl 025 chainsaw?
45.6 cc
How old is a STIHL 025 chainsaw?
The STIHL 025 chainsaw was first introduced in the mid-1990s and was produced until around 2002. Therefore, as of 2023, a STIHL 025 chainsaw would be approximately 21 to 28 years old, depending on the specific year it was manufactured. If you have a specific model year in mind, you can determine its exact age from that.
What is the spark plug for the fs 36 stihl weed eater?
The spark plug for a Stihl FS36 is a Bosch WSR6F gapped at .025
What is the correct spark plug fpr a Stihl 029 chain saw?
Bosch 7547 or better Bosch WSR6F. Also good results with NGK BPMR6A. Gap set at .020 to .025 for hot spark.
Spark plug gap setting for a stihl chainsaw 26''?
plug gap should be .025" http://store.chainsawr.com/
What is the fuel to oil ration for a model 025 stihl chainsaw?
I recomend 40:1 with good quality oil. http://store.chainsawr.com/
What causes a stihl 025 to run hot?
A Stihl 025 chainsaw can run hot due to several factors, including a dull chain that increases friction, insufficient lubrication from a clogged oil system, or a dirty air filter that restricts airflow. Additionally, using an incorrect fuel-to-oil mixture can lead to overheating. Overworking the saw or operating it at high RPMs for extended periods can also contribute to excessive heat. Regular maintenance and ensuring proper fuel ratios will help prevent these issues.
How do you set the carb on a stihl 025 chainsaw?
To set the carburetor on a Stihl 025 chainsaw, first ensure the chainsaw is off and cool. Locate the adjustment screws, typically labeled L (low speed), H (high speed), and T (idle). Start the chainsaw and let it warm up, then adjust the L screw for optimal idle speed and smooth acceleration, followed by the H screw for maximum power at full throttle. Finally, adjust the T screw for a stable idle, ensuring the chain does not move when idling.
What is the spark plug gap on poulan 2000 chain saw?
.025
