answersLogoWhite

0

There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor.

http://store.chainsawr.com/

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you adjust idle on poulan wild thing chainsaw?

Use the idle speed adjustment screw to set the idle speed as low as possible without stalling. http://store.chainsawr.com/


How do you adjust idle on Poulan Wild Thing 2375 Chainsaw?

Use the idle speed adjustment screw to set the idle speed as low as possible without stalling. http://store.chainsawr.com/


Where are the carburetor fuel lines on poulan wild thing chain saw?

From the rear of the machine, both lines are on the left. One feeds the carb and the other returns purged fuel to the tank when the "primer" is used.


What is the thing that cuts down trees?

Chainsaw


What is Difference between static and dynamic routing tables?

Technically, there is no such thing. The routing table has several entries (think of them as lines); the individual LINES in the routing table can be static or dynamic; and the routing table in its entirety can have both types. A static entry is programmed (hard-coded) by a network administrator. A dynamic entry is one which the router learns from a routing protocol, such as RIP, EIGRP, OSPF, BGP, etc. The routers "talk" to one another, and tell one another that they have routes to certain networks; the router that receives such updates will update its routing table as a result. Such entries are temporary, and expire after a relatively short time.


How do you get chainsaw in Pokemon emerald?

you can't theres no such thing


How would you describe the chainsaw?

the thing by which you cut people


Are Leatherface and Jason the same thing?

No, Leatherface and Jason are not the same thing. Leatherface is the chainsaw wielding killer in The Texas Chainsaw Massacreseries, while Jason Vorhees is the hockey mask, machete carrying killer in the Friday the 13th series.


Why does my 48 inch Poulan riding mower keep breaking mower belts?

some thing's probaly rubing on it. also check the clucth to see if it's working.


Where does the Texas chainsaw massacre live now?

There was no actual Texas Chainsaw Massacre. A very small part of the plot may be based on the crimes of Ed Gein in Wisconsin. If Ed was Leatherface, he died in 1984.


How tall is the Texas Chainsaw Massacre killer?

There is no real Texas Chainsaw Massacre killer; there is only the fictional character Leatherface, played by Gunnar Hansen in the original 1973 film. The Texas Chainsaw Massacre never happened in real life. See the Related Question below.


How do you spell the word meaning a big thing you use to cut stuff?

chainsaw, axe, hatchet, jackknife, scissors, knife?