23" measured from center of axle to lower bearing surface (where the stem meets the TOP of the LOWER triple tree).
31" from top of yube to axle
A 1998 Harley-Davidson Sportster typically requires about 10.5 ounces (310 ml) of fork oil per leg when performing a fork oil change. It's important to use the appropriate viscosity fork oil, usually 10W or 15W, depending on your riding style and preferences. Always refer to the owner's manual for specific recommendations and any updates on maintenance procedures.
The 2007 Harley-Davidson 883 Sportster typically requires about 11.5 ounces (or approximately 340 milliliters) of fork oil per fork tube. It's important to use the correct weight of fork oil, which is usually 20W for this model. Always consult the owner's manual for specific recommendations and procedures related to fork oil changes.
Hi I would like to know how weight and oil in front fork?
A 2003 Harley-Davidson Sportster typically requires about 11 ounces (325 ml) of fork oil per leg for the front forks. However, this can vary slightly depending on the specific model and whether any modifications have been made. It's always best to consult the owner's manual or a service manual for the exact specifications.
39mmx23.5inches
How much fork oil goes into a harley 2002 softail forks??
11.6 oz 15 wt for my 05
For a 1997 Harley-Davidson Sportster, the front forks typically require about 10.5 ounces (or approximately 310 mL) of fork oil per leg. It's important to check your owner's manual for specific recommendations, as the amount can vary slightly based on modifications or specific models. Additionally, ensure to use the recommended fork oil type and viscosity for optimal performance.
The 2002 Sportster 1200 typically holds about 11.5 ounces (or approximately 340 milliliters) of fork oil in each fork leg. However, it's important to consult your owner's manual or a service manual for the most accurate specifications and any specific procedures related to your model. Also, consider the type of riding you do, as different oil levels can impact fork performance.
lengh of a kichen fork
The frequency formula used to calculate the resonance frequency of a tuning fork is f (1/2) (Tension / (Mass per unit length Length)), where f is the resonance frequency, Tension is the tension in the tuning fork, Mass per unit length is the mass per unit length of the tuning fork, and Length is the length of the tuning fork.