0
Refer to repair manual (can be found at library or bought at parts store). and make sure you PROPERLY clean mating surfaces and use NEW gaskets and head bolts. Sorry for vague answer but it will save you alot of trouble. PS- make sure you understand the repair manual instructions because it is time consuming and you do not want to do this wrong
What else can I help you with?
What is fuel tank capacity for a 1993 Yamaha virago 1100?
The fuel tank capacity of the 1993 Yamaha XV Virago 1100 is 4.7 gallons. This is equivalent to 18 Liters.
How do you drain fuel from 1993 Yamaha virago 1100?
pull the gas line off of the carburetor and let it drain.
What is the torque specification for axle spindle nut on 1993 Voyager?
180ft.lb (244Nm)
What is the torque specification for spark plugs on a 1993 GMC Yukon 5.7?
13 ft lbs
What is the torque specification when replacing main bearings in a 1993 buick park avenue 3.8 supercharged?
Torque main bearing cap bolt to 26 Ft. Lbs. Then an additional 50 degrees
Will a 1993 Honda st 1100 triple tree fit a1993 Honda shadow 1100?
will a 1993 honda triple tree fit a 1993 honda shadow 1100
What is the oil capacity for 1993 Yamaha virago 750?
Hi: The oil capacite for the 750 Virago is 3.3 quarts with filter or 3.2 quarts with out Frank;
What is the Cylinder torque for a 1993 arctic cat 550 ext?
The cylinder torque specification for a 1993 Arctic Cat 550 EXT snowmobile is typically around 30-35 ft-lbs (40-47 Nm) for the cylinder head bolts. It's important to follow the proper torque sequence and to use a calibrated torque wrench for accuracy. Always consult the specific service manual for your model for the most accurate specifications and procedures.
What year is the engine on a Yamaha Virago engine prefix 5E5?
It looks like this is a 1993 model.
Cylinder head bolt torque for 1993 Mitsubishi expo?
cylender head bolt torque for 1993 Mitsubishi expo
What is the lug nut torque for a 1993 Volvo 960?
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
What are the torque specs of the Axle nut of a 93 mercury capri?
The torque specification for the axle nut on a 1993 Mercury Capri is typically around 150-175 ft-lbs (foot-pounds). It's important to ensure the nut is properly torqued to maintain wheel integrity and safety. Always refer to the vehicle's service manual for the most accurate and specific torque specifications for your model.
