answersLogoWhite

0

The torque specifications for a Yamaha Enticer 340 engine typically include 20 ft-lbs (27 Nm) for the cylinder head bolts and around 12-15 ft-lbs (16-20 Nm) for the crankcase bolts. However, it's essential to refer to the specific service manual for your model year for the most accurate information, as specifications can vary slightly. Always ensure that the bolts are torqued in the correct sequence for optimal performance.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What is the horsepower of a Yamaha enticer 340 snowmobile?

The engine that comes standard with every Enticer 340 is a two-stroke, fan-cooled twin engine designed for this snowmobile. It reaches a maximum horsepower of 32 at 6,500 rpm, and a maximum torque of 25 foot-pounds at 6,000 rpm. With an engine size of 440-cubic centimeters, the Enticer can reach a maximum speed of 55 mph on the snow.


What is the compression ratio for 1979 Yamaha 340 enticer?

The compression ratio for the 1979 Yamaha 340 Enticer snowmobile is 6.9:1. This ratio indicates the relationship between the cylinder's total volume when the piston is at the bottom of its stroke compared to the volume when the piston is at the top. This compression helps optimize engine performance and fuel efficiency.


What is the track length of a 1984 Yamaha enticer 340 short track?

The track length of a 1984 Yamaha Enticer 340 short track is approximately 340cc. This snowmobile is designed for shorter tracks, typically around 121 inches in length, which provides agility and maneuverability for trail riding. The model is known for its lightweight design and performance in snow conditions.


How much do you torque the head bolts on a Yamaha gs 340?

20 foot pounds


What is the recommended fuel octane for a Yamaha enticer 340?

their really is not a specific fuel octane mix. if you just run premium in it, it will be fine, but if you do put octane in, just put a little bit in it. because it could make your fuel too rich and foul out your spark plugs.


What is the recommended fuel octane for a Yamaha enticer 340 snowmobile?

Answer this question…there isn't a specific mix but you don't want to much because it can cause the spark plugs to foul out. if you do put any in put a little bit .also always run your snowmobiles on premium fuel


Why does 1988 enticer 340 keep blowing pistons?

most likely a crank seal is leaking, or carb boots. have a shop test the crankcase for leaks


How much hp is 340 pounds of torque?

To convert torque to horsepower, you can use the formula: horsepower (hp) = (torque (lb-ft) × RPM) / 5252. Since horsepower depends on the engine speed (RPM), 340 pounds of torque could represent different horsepower values at different RPMs. For example, at 3,000 RPM, 340 lb-ft of torque would equal approximately 193 hp, while at 6,000 RPM, it would equal around 386 hp.


What Arctic cat 340 head torque?

23-25 ft.-lbs.


How much horsepower does a 02'camaro SS have?

its got 325 HP and 340 Torque


Engen specs 1969 dart swinger 340?

275 underrated horsepower, more like 325 horse.


How long is a 1976 Yamaha 340 snowmobile?

The 1976 Yamaha 340 snowmobile typically measures about 100 inches in length. This model was designed for durability and performance, reflecting the standards of its time. For specific measurements, it's always best to consult the owner's manual or manufacturer specifications.