cold intake is 0.003 in or .07 mm
cold exhaust is 0.003 in or .07 mm
.003 in
Intake valve .003, exhaust valve .005.
Yes
Valve clearance (cold) Intake 0.005 to 0.007 in Exhaust 0.010 to 0.012 in
1500 cc
yes
my clymer states 0.08mm (0.003in) intake and exhaust
Adjust the sprocket of the chain
It takes 24x9.00-11
To check the valve clearance on a 1986 Honda 200 ATC, first, remove the seat and the side covers to access the engine. Then, rotate the engine to top dead center (TDC) on the compression stroke for the cylinder you are checking. Use a feeler gauge to measure the clearance between the valve stem and the rocker arm; the specifications for the intake and exhaust valves can typically be found in the service manual. If the clearance is out of spec, adjust it using the appropriate adjusters.
Cold settings are Inlet 0.12-0.18 mm Exhaust 0.15-0.18 mm
The size is 16x8.0x7