The correct valve clearance for kawasaki 175 is 0.06mm for intake and for the exhaust is 0.08mm
for barako 175 for me much better is 0.03 for intake and for exhaust is 0.07
The clearance for the intake valve of the Kawasaki Barako 175 is typically set at 0.05 mm (0.002 inches). To adjust the valve clearance, first, ensure the engine is cold. Remove the valve cover, then use a feeler gauge to measure the gap between the rocker arm and the valve stem. If adjustment is needed, loosen the lock nut, turn the adjustment screw to achieve the correct clearance, and then re-tighten the lock nut. Always recheck the clearance after adjustments are made.
the standard valve clearance for kawasaki barako is 0.08mm for intake and 0.10 for exhaust
valve adjustment on 400bayou 1999
To adjust the valve clearance on a Kawasaki Barako 175, first, ensure the engine is cool and remove the necessary components to access the valve cover. Rotate the engine to set it at top dead center (TDC) on the compression stroke for the cylinder you are adjusting. Use a feeler gauge to measure the gap between the valve stem and the rocker arm, adjusting the clearance by loosening the lock nut and turning the adjusting screw until the desired gap is achieved. Finally, re-tighten the lock nut, reassemble any removed parts, and start the engine to check for proper operation.
.003 intake and .005 exaust
The valve clearance for the Kawasaki Rouser 135 is typically set at 0.10 mm (0.004 inches) for both the intake and exhaust valves. It's important to check and adjust the valve clearance periodically to ensure optimal engine performance and longevity. Always refer to the owner's manual for specific maintenance guidelines and procedures.
you can go to kawasaki.com and click on my kawasaki and you should be able to get all specs needed
The valve clearance for the Kawasaki Boxer CT150 is typically set at 0.05 mm (0.002 inches) for both the intake and exhaust valves. It's important to check and adjust the valve clearance periodically to ensure proper engine performance and longevity. Always refer to the owner's manual or a service manual for the most accurate specifications and procedures.
The recommended valve clearance for the Kawasaki Boxer CT150 is typically 0.05 mm (0.002 inches) for both the intake and exhaust valves. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance and longevity. Always refer to the owner's manual or service manual for the most accurate specifications and maintenance guidelines.
.007 to .009 on the intake .009 to .011 on exhaust
intake 0.10 exhaust 0.20 engine cold