Engine cold: Intake 0.06-0.1 mm (.00023"-.00039"). Exhaust 0.16-0.20 mm (.00063"-.00079")
1.8 quarts.
The Yamaha 350 raptor is the same thing as a Yamaha warrior just with liquid cooling the motors still basically all the same the valve setting on my 2000 warrior are .004 on intake and .006 on exhaust
The head bolt torque, on a 3304 Caterpillar engine, is 350 pounds per square inch. The valve lash should be adjusted to .023.
The raptor 350 by ALOT
The raptor 350 is slow. My 2008 Ktm85sx beat it. never by a raptor.
the raptor 350 is faster but not by much
the raptor quad is made by yamaha
That would be zero valve lash. You only use a feeler gauge on solid lifters.
Zero lash then one turn in. (assuming this is a stock Chevy 350)
I have a gps and a stock raptor goes 62
5 gears, the raptor 350 has 6
There is no 450 Raptor, it is either a Raptor 250, 350, 660 or 700. If it is a 450 then it is a YFZ.