Depending on the mileage you would use 10w30 for under 80,000 miles and over that you would want to consider a synthetic oil. Remember when switching to a synthetic oil always completely drain the oil in the engine and change the filter before applying the synthetic. Otherwise the oil will become gummy and will not work as efficently to reduce friction. *For colder climates, (Below 32F) and general use Ford recommends using 5w-30. But I agree with the prior answer, synthetic is superior and you can certainly use 10w-30 for anything above freezing, especially if the ambient temperature is higher than 90F. Synthetic oils and conventional oils mix fine, they will not gum up when combined
According to the ( 1996 ) Mercury Tracer Owner Guide : With engine oil filter change : Both the 1.8 and the 1.9 take : ( 4.0 U.S. quarts , 5W-30 is the PREFERRED oil )
5w-20 seems to be the norm for cars in that year ... check your manual if you have one -------------------------------------------------------------------------------------------------- The ( 1996 ) Mercury Tracer owners manual shows ( 5W-30 ) is the preferred engine oil weight
The engine oil pan is bolted to the bottom of the engine on your 1994 Mercury Tracer
Mercury made the tracer, not Chevy
The 1998 Mercury Tracer owners manual shows : 4.0 quarts ( 3.8 liters ) with oil filter change
5W-30
oil plugs are located somewhere on the bottom of oil drain pans
According to the ( 1996 ) Mercury Tracer Owner Guide : With engine oil filter change : Both the 1.9 and 1.8 take : ( 4.0 U.S. quarts , 5W-30 is the PREFERRED oil )
About 4 quarts.
4 quarts
These engines take about 4 quarts of oil.
According to the 1998 Mercury Tracer Owner Guide : With engine oil filter change , the 2.0 liter SOHC four cylinder engine takes : ( 3.8 litres / 4.0 U.S. quarts of 5W-30 )