10w40
Just over 5 quarts.
Unfortunately there aren't any.
3.6
15412-KEA-003
.006" intake, .009" exhaust. Adjusted with engine cold.
4 gallons
The 2004 Honda Rubicon 500 requires a mixture of 50% antifreeze and 50% distilled water for its coolant. It's recommended to use a high-quality, ethylene glycol-based coolant that is compatible with aluminum engines. Always check the owner's manual for specific recommendations and ensure the coolant meets the necessary specifications for optimal performance.
This vehicle takes 2.3 quarts If It has the manual shirt transmission.
hold the odo and the button right underneath it at the same time for 2 sec.
sitting on it, it would be under the cover with three bolts on it on the bottom right side of the motor
On a 2002 Honda ATV 500 Rubicon, the oil filter is located on the left side of the engine, near the bottom. It is a cylindrical filter that may be covered by a plastic guard or panel. To access it, you may need to remove any obstacles like the skid plate or side panels for easier reach during an oil change.
The Honda Rubicon 500 typically requires 10W-30 or 10W-40 engine oil, depending on the temperature and conditions in which you are operating the ATV. It's important to use a high-quality oil that meets the specifications outlined in the owner's manual. For the transmission, Honda recommends using their specific ATF (automatic transmission fluid) for optimal performance. Always check the manual for the most accurate information regarding oil specifications and maintenance intervals.