For a 1975 Yamaha Enduro 175, it's recommended to use a high-quality 2-stroke oil specifically designed for air-cooled engines. Look for an oil that meets or exceeds JASO FC or ISO EGD specifications to ensure optimal performance and protection. Mixing the oil with gasoline at a ratio of 32:1 (one part oil to 32 parts fuel) is typically advised for this model. Always consult the owner's manual for specific recommendations and guidelines.
For a 1978 Yamaha Enduro 175, it is recommended to use a 10W-40 or 10W-30 oil for the engine. For the transmission, a 30-weight oil is typically advised. Always check the owner's manual for specific recommendations, as oil preferences can vary based on local climate and personal riding conditions.
Well since its Yamaha always go with yamalube synthetic oilAnswer 2Unless you can find a Better Synthetic oil
2 cycle.... since it a 2 stroke
The XT 250 takes 1.3 liters of oil.
650cc. Recommended volume is stamped into the side of the engine case above the kick starter.
600cc
440 cc
SAE 10W/30 175cc (5.85oz.) per fork leg
That Yamaha takes 1.3 litres of 15w/50, and the amount of oil appears to be the same all across the XT250 range. Be very careful not to use a car oil. Most of them have friction modifiers which will damage your clutch.
7.8 oz. of 10wt fork oil
1000 cc
Its called an "Enduro" use the oil specified by the manual. If you do not have a manual use yamalube 10W 30wt. if you have to ask you probably shouldnt be changing the oil yourself take it to a shop. always change the oil filter w/the oil