40:1 you can go with 32:1 might smoke just a little bit more.
50:1
.80 for 1 qt.
To determine the amount of water needed for 80 pounds of concrete mix, you typically use a water-to-cement ratio. A common ratio is 0.5, meaning for every 100 pounds of concrete mix, you would use about 50 pounds (or approximately 6 gallons) of water. For 80 pounds of concrete mix, you would need around 4 pounds of water, or about 0.5 gallons. However, it's essential to check the specific instructions on the concrete mix packaging, as different mixes may have varying requirements.
50:1 ratio 16 oz 2 stroke marine motor oil to every 6 gallons of gasoline this is most common I use this mix ratio in my 80 hp mercury spitfire
It is 80/1.
40 parts gasoline one part two cycle oil
ratio = 80% : 20% or 80 : 20 ot 8 : 2 or 4 : 1
The ratio of 80 to 48 can be simplified by dividing both numbers by their greatest common divisor, which is 16. This results in the simplified ratio of 5 to 3. Therefore, the ratio 80 to 48 is 5:3.
The ratio of 120 ml to 80 ml is 3:2 and the ratio of 80 ml to 120 ml is 2:3.
The ratio of 70 to 80 can be simplified by dividing both numbers by their greatest common divisor, which is 10. This gives us a simplified ratio of 7 to 8. Therefore, the ratio of 70 to 80 is 7:8.
The ratio of 150 to 80 can be expressed as 150:80. To simplify it, divide both numbers by their greatest common divisor, which is 10, resulting in a simplified ratio of 15:8.
The ratio is 270 : 80 which can be simplified, if required.