The compression for a 2002 Suzuki JR80 should typically be around 120-150 psi when measured with a compression gauge. It's important to ensure that the engine is at operating temperature and that the throttle is fully open during the measurement for accurate results. If the compression is significantly lower than this range, it may indicate wear in the piston rings or cylinder, requiring further inspection or maintenance.
what should the compression be on a yamaha big wheel 80
You should run 93 or higher
Mine had about 80-110 psi
120 psi
How can restrict a suzuki lt80 transport
120 Compression.
high quality suzuki oil 40:1
A golf ball with a compression rating of 70-80 is considered a "low compression" ball. They distort easier, giving them a softer feel and more greenside control but less distance.
yes this is an actual suzuki electric piano model
The Yamaha ttr 125 would kick the suzuki rm 80's butt there is no comparison
should be like 80 or 90 weight gear oil
Get the compreesion spec, then aquire a compression leak down kit. Test compression, make sure it is in or close to spec. If compression is fine, try an NGK BR series plug, and clean then adjust the carb to spec. If the engine does not fire, check for spark and fuel flow. If the engine still does not fire, take it to a service pro. If all above systems are fine, then you should have it running in no time.