answersLogoWhite

0

i believe anything over 115psi should be fine. 115psi is the service minimum, as in if it drops below that the engine needs a rebuild

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What should compression on 1995 polaris Indy 500?

The compression on a 1995 Polaris Indy 500 snowmobile typically ranges between 120 to 130 psi. It's essential to ensure that the compression is within this range for optimal engine performance and reliability. If the compression is significantly lower, it could indicate issues such as worn rings, a blown head gasket, or valve problems. Regular maintenance and checks can help maintain proper compression levels.


What is the compression on the cylinder on a 1995 Mercury 60hp?

The compression on a 1995 Mercury 60hp outboard motor typically ranges from 90 to 120 psi across all cylinders. It's essential for each cylinder to have similar readings for optimal performance. If compression is significantly lower in one cylinder, it may indicate issues such as worn rings, a blown head gasket, or valve problems. Regular compression checks can help maintain engine health.


What do you do if one of the cylinders are not firing on a 1995 Plymouth Acclaim 4-cylinder 2.5?

run a compression test on it should read about 150 i think bad head gasket or crack in head.


Why would the 8th cylinder in a 1995 camaro z28 not work?

Bad spark plug or wire? Bad Valve or piston? (do a compression test)


How do you line up the timing chain marks on 1995 land rover 3.9l v8?

Set your #1 cylinder to TDC on the compression stroke.


1995 polaris xcr 600 top end speed?

in the right conditons you should get around 105mph


What is the oil mixture for a 1995 Polaris 300 sportsman?

Idon't know about a 1995 Polaris 300 Sportsman, but I have a 2008 Polaris 300 Sportsman and the main particular oil I use for mine is Polaris brand oil. If your not satisfied with my answer, call your Polaris Company.


1995 Harley Softail rear plug misfiring.?

1st check the compression on the rear cylinder to the compression on the front cylinder they should be about the same. 2nd With a spark indicator and the motor running check to make sure you have steady spark if not bad coil. 3rd if both of the above check out ok. replace your intake gasekts the one on the rear is leaking. I assumed that you have already change out your plugs and plug wires.


How can you tell if the heads are cracked on a 3.8 3800 Series 1995 Camaro?

A compression test would be the easiest way to determine. If you have little or no compression in two or more adjacent cylinders, you either have a cracked cylinder head or a blown head gasket.


How many grease fittings are on a 1996 polaris scrambler?

I have a 1995 400cc Polaris scrambler and I count 15.


What is the spark plug gap specs for a 1995 polaris xlt?

spark plug gap for polaris 425


Where are fuses on 1995 Polaris sportsman 500?

Take off the front rack and front slope cover , should be under cover .