1 11/16. BTW just learned easier to remove with an impact wrench. no need to buy specialty wrench... A local mech showed me works like a champ!!!
Oh, isn't that a happy little question! The bolt size for the bell housing on an '87 Suzuki Samurai is typically 10mm. As for the clutch plate bolts, they are usually around 8mm in size. Just remember, there are no mistakes, only happy little accidents in the world of DIY auto repair.
Open the clutch cover. Pull out the bolts on the clutch pressure plate and remove it and andthe springs. Pull out the clutch plates. You'll need a clutch holding tool (you can purchase from Rocky Mountain ATV.com) or an impact wrench and something to wedge in between the inner hub and the clutch basket. You'll also need at socket that is 1 &1/16 inch in diameter. Not sure what the metric size is but this will fit though the bolt is metric. Remove the lifter pin (it pulls out) and then remove that bolt. Your clutch basket should now be free.
The Baja Heat mini bike has a 200cc 6.5 Hp size engine.
1.5d+ 1 or 2, where d is the bolt size
the size is E14
a star bolt is actually called a torex bolt and most small ones you see will be T15 size or t20 size
The appropriate socket size for a 10.9 bolt is typically 17mm.
The standard size of a bike crank bolt is typically 14mm.
The size is probably an half inch bolt to 3/4 bolt.
The nominal diameter of a bolt is the approximate size of the bolt shaft. It is determined by measuring the diameter of the threaded portion of the bolt shaft, excluding the threads. This measurement is standardized based on the bolt's size and type.
which bolt
What size bolt for a 2005 Honda civic DX power steering tank bracket..