36 mm
60 - 65 ft/lbs
1 inch.
It should be one inch.
1 inch
The wheels from a 2013 Road Glide are not directly compatible with a 1998 Road Glide due to differences in hub design, axle size, and brake rotor configurations. While both models are part of the Harley-Davidson touring family, significant changes were made over the years. To use wheels from a 2013 model on a 1998, you would likely need custom adapters or modifications, which may not be practical. Always consult with a professional mechanic or Harley-Davidson specialist for precise compatibility details.
31" from top of yube to axle
60 ft/lbs.
The axle torque specifications for a 2013 Harley-Davidson FLHTCU (Electra Glide Ultra Classic) are typically around 50-55 ft-lbs for the front axle and 70-75 ft-lbs for the rear axle. It's important to consult the owner's manual or a service manual for the most accurate specifications, as they can vary based on specific configurations or modifications. Always use a calibrated torque wrench to ensure proper tightening.
The length of the rear axle for a 1977 Harley Davidson Sportster is approximately 3/4 inch in diameter and typically around 10.5 inches long. However, variations can occur depending on specific models and modifications. For precise measurements, it's advisable to consult the motorcycle's service manual or reach out to a Harley Davidson dealer.
100 ft lbs
3.4" oem part 41110-79A
The axle size for the front wheel of a 2004 Harley FXDI is 25mm (1 inch), while the rear wheel axle size is 1 inch (25.4mm). This configuration is typical for many Harley-Davidson models of that era. Always verify with a service manual or dealer for specific maintenance needs.