answersLogoWhite

0

a size 12 mm for the drain plug. and a size 17 for the oil filter housing.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you change rear Honda wheel stud?

I had to do this oncve and thought I could do it myself, but after taking off the wheel found I need special tool to do it, so had to put back together and ask the Honda dealership to do it.


Do you need a special tool to change wheel bearings in a 97 corolla?

No, no 'special' tool but you do need a decent, relatively complete tool set.


Whats the name and where do you find the tool you need to remove the crank shaft pulley on a 94 Honda accord ex?

Honda Crank Pulley Tool 50mm. The part number is 646796 at DenLorsTools.com. There is a video that shows it in use.


How do you reset the 2009 Honda odyssey oil change light?

you either need a good scan tool take it to a shop that's has a scan tool or take the terminals off the battery for 5-10 mins but this might reset something u don't want to be reseted i would suggest a scan tool


Where is the drain plug for a 350 trx Honda ATV rear and front ends?

need to know what size tool to drain rear end on a Honda fourtrax


Do you need a special tool to change fuel injectors?

yes


Are there any special tools needed to change brake shoes on a 2004 Honda Accord?

It does not have brake shoes, it has brake pads. And, yes you will need a special caliber compression tool. You can borrow this tool at almost any auto parts store that sells pads. Just ask.


What does the tool light mean on Honda?

Maintenance is required. Your owners manual will tell you what service is needed. Can be just an oil/filter change.


Do you need a special tool to change a serpentine belt on a 2001 Buick Regal?

I need to know if I need a special to to change my serpentine belt on a 2001 Buick Regal


How do you change the rear brakes on a Honda Accord?

To squeeze the piston back inside the caliper, you need to twist and push in on the piston. Turn the piston clockwise with a big screwdriver if you do not have the correct tool to do so. A large prybar works good for this. Eddie


How do you get the rear caliper on a 1998 Honda Accord pushed in for replacing the rear pads?

You need a special tool. Most auto parts stores will lend you the tool if you buy the pads from them. Just ask.


Where is the towing light harness on a 2004 Honda Odyssey?

inside the tire change tool door located inside left after opening tailgate door