According to the manual of the 2008 C-14, it requires API "GL-5" Hypoid gear oil, either SAE 90 (above 41 Fahrenheit) or SAE 80 (below 41 Fahrenheit). A "GL-6" rated hypoid gear oil may also be used.
PUT A NEW SEAL ON THE SHIFTER SIDE GEAR CASE. What type GEAR oil goes in Kawasaki KLF 185 TYPE AND AMMOUNT??
gear oil
The type of oil that is used in a 1991 Kawasaki KX250, 2 stroke, in the bottom half of the crank case is called gear oil. The best form of this oil is 80-90W Gear Oil made by Standard Oil.
I use 85-140 but as long as it is a good oil you can use 80-90W.
regular 87 octane
SAE 5w30 Full Synthetic.
To add gear oil to a Kawasaki Mule 600, locate the gear oil fill plug on the front differential. Remove the fill plug using the appropriate tool, and then use a funnel to pour the recommended gear oil into the opening until it reaches the proper level, usually just below the fill hole. Always check your owner's manual for the specific type and amount of gear oil required. After adding, replace the fill plug securely.
The Kawasaki Mule 3010 4x4 typically requires a high-quality gear oil with a viscosity of 80W-90 or an equivalent. It is important to use a gear oil that meets the API GL-4 or GL-5 specifications to ensure optimal performance and protection. Always refer to the owner's manual for specific recommendations and maintenance guidelines.
it depends wat type but in general kawasaki are a good brand
Oil type
how much oil is needed when changing oil on 2006 kawasaki concours
What kind of oil dose a 03 kawasaki 636 take