The Yamaha DT175 engine with the number 3TS-016732 is from the year 1981. Yamaha's engine numbering system allows for the identification of model years, and the "3TS" prefix corresponds to the 1981 model year for the DT175.
production code 2x2,1979.
production code 2x2,1979.
front part of frame near triple clamp
the 8th digit back is a k so its a 1990
Hi, after loads of research into mine, which is also a 1g1,it is 1976 -1977
For the 2000 Yamaha DT175, each fork leg typically requires about 400cc (or 400ml) of fork oil. It's important to check the owner's manual or service manual for your specific model for any variations. Additionally, ensure you use the recommended type and viscosity of fork oil for optimal performance.
The 1980 Yamaha Enduro models typically feature a five-speed transmission. This includes models like the Yamaha DT175 and DT250, which were popular during that era. The five-speed gearbox allows for a good balance of power and control on various terrains.
The Blaster Engine is derived from the 1970s IT175/DT175. It is also used in the 1990s RT180.
2 stroke. it has an oil injector that automatically adds oil the the fuel mix. fill oil tank on left side of the bike, should have a nickel sized window where oil level is visible when oil level gets low enough to require adding.