1994 / 1996
Aprilia RSV's are found for sale online at Piston Heads, eBay, and Gum Tree and through the publications Cycle Trader and Auto Trader and their websites.
A fair price for a used Aprilia RS250 will vary based on year, condition, history of bike (wrecks, damages, etc.) and if you're purchasing it from a private owner or dealer. The average price is between $4,000 and $6,000.
An Aprilia RS 125 Motorcycle usually cost around 4,219 Euros on average. This is closer to 6,000 United States Dollars. A used price would be $1,500 to $,2,000 lower.
the biggest cc engine you can ride on is a 50cc on L plates i would suggest buying something like a aprilia rs50 as this will get you used to a feel of a bike they also go faster than the scooters
There is no set amount of horse powers per cc, it depends entirely on how efficient the engine design is, the type of fuel and other factors, this is easily demonstrated by a 4 stroke lawnmower engine, of 160cc (I used a honda gx160 for this example), which produces 5.5 hp and a 2 stroke 125cc (FR125 Rotax Max in this example) engine which produces 22hp. As I said, its all in the design. Sorry I couldn't answer your question. Hope this helps. Matt
Jet Engine is used in jets.
Usually, within a standard Dellorto carburettor (With a 12.5 or 8.5 Venturi) , for a FR125 Rotax Max engine, a K98 or K27 needle will be used. The needles can be determined from each other due to the amount of tapering on it. A K98 has very little tapering, which creates a leaner fuel/air mixture, which improves acceleration, however using a K98 needle has a negative effect on the higher rev range (around 12,000+ rpm), as often not enough fuel reaches the cylinder, and you get a "coughing" or "popping" effect. On the other hand, using a K27 means that the needle has a much higher taper to it, causing more fuel to pass, which creates a richer fuel/air ratio, reducing acceleration, but improving high rev performance. Therefore we can conclude that the K27 needle is preferable at higher speed tracks, whilst lower speed tracks will be best suited by a K98 needle.
If gasoline is used in a diesel it will damage the engine. If diesel is used in a gasoline engine it will do no real damage as the engine will not run.
Oil that has been removed from an internal combustion engine after being used as a lubricant in that engine.
No. It is used to lower engine emissions.
cheveront
oil can be used to ludricate engine parts to avoid wear and knocking of engine.