0
What else can I help you with?
Yamalube 4 sae10w30 vs sae20w40?
what is the difference? can someone enlighten me with a good answer?
How much oil for 4 stroke 50cc?
If you buy Yamalube, it will tell you on the label what the ratio is.
What type of motor oil in 1983 Yamaha xs650sk?
yamalube 4
What is yamalube 4?
Yamalube 4 is a high-performance, synthetic blend engine oil specifically formulated for Yamaha four-stroke motorcycles, ATVs, and other recreational vehicles. It provides excellent lubrication, protection against wear, and helps maintain engine cleanliness. Designed to meet the demands of high-performance engines, Yamalube 4 also promotes improved fuel efficiency and overall engine longevity. Using the right oil, like Yamalube 4, is essential for optimal vehicle performance and reliability.
What kind of oil does a Manco 90cc 2 stroke 4 wheeler use?
yamalube
What type of oil goes in a yz250?
If your asking about pre-mix oil that you mix with the gasoline, they recommend Yamalube "R" (Yamalube racing 2-cycle oil) Mixing ratio : 30:1 or Castrol A747 For the transmission and gearbox, Yamalube 4 (10W-30) or SAE 10W-30 type SE motor oil.
What kind of oil do you put in a 2001 Yamaha blaster crankcase?
stock yamalube 4 stroke oil for the transmission only
What kind of oil goes in a Yamaha rt 100 crankcase?
Yamalube 4 (10W30) or SAE 10W30 type SE motor oil. 0.69 US qt. Total 0.74 US qt. This is out of 1997 owners manual. Use Yamalube 2-cycle oil or good quality oil rated for injection in the tank under the seat.
How much oil goes in the gears on a 1999 Yamaha YZ250?
the proper gear oil for a 125 is yamalube 10w 30
What kind of Transmission fluid does a 2004 Yamaha Blaster take?
Yamalube 4 or a comparable 10w-30 motor oil. Just doing a trans fluid change use 22.08 oz which is .69 quarts or 650 milliliters.
What is 4 divided Buy 292?
4 divided buy 292 = 0.0136986301369863
What weight oil should you use for a Yamaha XT 350?
i have an 85 xt350. yamalube 4-stroke 10w-40 (not sythetic) 10w means it doesn't have cold shifting problems 40 means that after the oil heats up, it is like 40 weight oil so the gears in the tranny have plenty of oil between them. 20w50 made the shifting too hard The Clymer calls for either 20w40 or 10w30 yamalube but they don't make those anymore. Cheers - Jeff
