You can buy a Manual or go online.
I have toped out at about 61mph before. The 400 sportsman goes about 55 to 60mph. The sportsman 500 flies down trails and has great accelaratsion. The sportsman 850 will do 84mph and the 550 broke in good and everthing will do close to 70mph. The 800 will do about 70mph to 75mph
For a 2005 Polaris Sportsman 500 6x6, the recommended spark plug is the NGK BR9ES. This spark plug is designed to provide optimal performance and reliability for your ATV. Always ensure the spark plug gap is set correctly according to the manufacturer's specifications before installation.
there isn't a fuse, before the starter solenoid there is a circuit breaker 20 amp, let me know if you need a diagram i need a diagram
The 2006 Polaris Sportsman 500 typically uses NGK ZMR7A or equivalent spark plugs. It's important to ensure that the spark plugs are properly gapped according to the manufacturer's specifications for optimal performance. Always consult the owner's manual or a professional for confirmation before purchasing replacements.
For the Polaris 300 Sportsman, the recommended NGK spark plug is typically the NGK BR9ES. It's essential to check your owner's manual or consult with a dealer for the exact specifications, as variations may exist depending on the model year. Always ensure that the spark plug is properly gapped before installation to ensure optimal performance.
On a 2004 Polaris Sportsman 500 ATP HO, you should grease the front and rear suspension components, steering components, and drive shafts. Use a high-quality lithium grease and follow the recommended intervals in the owner's manual for regular maintenance. Make sure to clean and inspect the components before greasing to ensure proper lubrication.
To add coolant to your 2000 Polaris Sportsman, locate the radiator cap, which is usually found near the front of the engine compartment. Ensure the engine is cool before opening the cap to avoid burns. Add the appropriate coolant mixture until it reaches the recommended level, then securely replace the cap. Always consult your owner’s manual for specific instructions and coolant specifications.
The radiator cap on a Polaris Sportsman 450 is typically located on the radiator itself, which is situated at the front of the ATV. You'll find it near the center or slightly to one side, depending on the model year. To access it, you may need to remove any surrounding panels or covers. Always ensure that the engine is cool before removing the cap to prevent burns from hot coolant.
The fuses for the Polaris Sportsman 500 ATV are typically located in the fuse box, which is usually found under the front panel or near the battery. To access the fuse box, you may need to remove a few screws or clips. Refer to the owner’s manual for specific locations and diagrams related to your model year. Always ensure the ATV is turned off before inspecting the fuses.
On a 2010 Polaris Sportsman 500 HO, the fuel filter is typically located in the fuel line near the fuel tank. It can often be found near the fuel pump or just before the carburetor. For easier access, you may need to lift the seat and remove any protective covers. Always refer to the owner's manual for specific details and diagrams.
On a 2002 Polaris Sportsman 500 HO, the fuel filter is typically located along the fuel line, near the fuel tank. To access it, you may need to remove the plastic panel or seat cover. It's advisable to check the service manual for specific locations and replacement instructions. Always ensure the engine is off and cool before attempting any maintenance.
On a Polaris 500 Sportsman, the inline fuses are typically located near the battery, often within the wiring harness. You may find them in a fuse box or directly on the wires leading to various electrical components. It's important to consult the owner's manual for specific diagrams and locations, as they can vary by model year. Always ensure the vehicle is turned off before inspecting or replacing any fuses.