0
Where can you find a free 1980 suzuki gs550 repair manual online?
Wiki User
∙ 9y ago
You can find a free 1980 Suzuki GS 550 repair manual on the companies website. Many motorcycle parts websites have the repair manual.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
1978 Suzuki GS550?
yes
How man quarts of oild does a 82 suzuki gs550 hold?
A 1982 Suzuki GS550 holds approximately 3.5 quarts of oil. The type of oil used depends on the location of the motorcycle. Colder environments call for different viscosity of oil to be used.
What is the engine oil capacity of a 1981 Suzuki GS550?
The crank case say 2.4 liters.
How do you clean the carburetor on a 1979 suzuki gs550?
To clean the carburetor on the 1979 Suzuki GS550, it is a good idea to empty the carburetor and remove all fuel lines. Then, replace the float and valve in the carburetor and clean the bowl. Fill the carburetor with fuel and flush several times.Ê
What is the gap for a spark plug for a 1983 suzuki gs550es?
At least one spark plug manufacturer (NGK) recommends a gap of .028" for a 1983 Suzuki GS550 (this is for the D9EA spark plug). Interesting to note, a 1982 Suzuki GS550 uses a different plug (B8ES), and the gap for that one is .032". So if you have a 1983 model, that gap should be .028".
Where can you find the vin on a suzuki gs550?
It should be on the frame area where the fork connects.If you can't find it your bike may be stolen!
How many cylinders on a 1978 suzuki gs550?
if its the same as my 1979 gs 550 its 4, 4 carbs per cylinder DOHC " dual over head cams
What is main jet size in a suzuki GS550 carburetor?
if you have a 1979 1982 has an 80mm main jet the carb number is VN22SS i believe. I just snapped mine in half and im looking for one
Oil for 1981 gs550 10w30 or 1040?
1040
1983 sukui gl550 spark plug gap?
If your referring to Suzuki GS550L. According to a NGK master catalog I have a 198e Gs550, Standard plug is a NGK D8ES, Gold tip NGKD8EV and Platinum NGKD8EVX All gapped ar .028
Will a 1977 gt750 engine fit in a 1977 gs550 frame?
Short answer: No If you care why: A GS750 motor will not fit into a GS550 frame with out major frame modification. I have a '77 GS550 and a '78 GS750 (there is no major difference in models during these years), I measured my 750 and compared it to the GS550's frame. You MIGHT get the 750 in height wise, but the motor is too long to fit with out extending the frame. To do this you would also have to change the mounting position of the fuel tank rearwards to meet with the seat again, the wire harnesses also may have to be torn apart and lengthened. In my opinion it would be easier to seek a rolling GS750 chassis, mine has dual disc brakes in the front and one in the back. I believe the '77 GS750 had one disc in the front and one in the back, whereas the GS550 uses a drum.
How do you tell if susuki gs550 is on prime or not?
On the petcock the postions are straight down "run", straight up "reserve" and "prime" is between the two settings.
