answersLogoWhite

0

Hi, Engine model not specified, but I gather it to be a 28 cu. in. engine. Idle is done with a tachometer and should be 1800 RPM +/- 50. The mixture is generally only adjustable on the low speed circuit thanks to the EPA. Idle speed adjusted above the venturi with a Phillips/slotted screwdriver. Low speed mixture screw is near the intake manifold, usually at a 45 degree angle and having a limiter cap (unless removed.) Adjust idle after engine has warmed five minutes at full throttle. Then adjust mixture for maximum speed, if available(may seem to have little effect or no effect if limiter installed. Accellerate to full speed and use hand on linkage to manually bring to idle. Engine should accellerate smoothly when released if correct. No CO meter required. Peace, crigby

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How many cc in a 6.75 Briggs and Stratton motor?

190cc


What is oil capacity for 17hp briggs and stratton motor?

48oz


What size spark plug fits a Briggs and stratton 3.75 hp motor?

what plug size fits a 3.75 briggs and stratton,and a 19.5 briggs engine and what is the gap. thank you


What grade motor oil for a Briggs and stratton 15 horse?

SAE30


How many hp is 1350 Briggs and stratton motor on a snowblower?

9


What is the name of a Briggs and stratton lawn mower model 096722?

It is a 2-cycle 4HP Briggs motor.


What type of oil does a 17.5 horsepower Briggs and stratton use?

A Briggs and Stratton 17.5 horsepower engine can use any type of small engine motor oil. A heavy duty motor oil is recommended.


What is the gas ratio for a 3.5 Briggs and straton?

For a Briggs and Stratton motor 3.5 motor used straight gas and oil in the crank-case, there is no ratio.


Where can you find a Sears manual for a 20 HP Briggs and Stratton motor?

google


What is the conversion for a 205 cc to hp in a Briggs and Stratton motor snowblower?

13.6


How many horsepower does a Briggs and Stratton 1450 series motor have?

7.75 HP


What size spark plug fits a Briggs and stratton 6.5hp motor?

official site for Briggs and Stratton Spark Plugs is: http://www.briggsandstratton.com/maint_repair/routine_maintenance/choosing_spark_plugs/ The proper spark plug will depend on the type of 6.5 HP motor that you have. Briggs and Stratton made several different ones and the best way to get the proper plug will be to call an authorized Briggs and Stratton repair shop with the mower make and model numbers.