The location of the blue wire on a 50cc gas scooter can vary depending on the make and model of the scooter. Typically, wiring diagrams or service manuals specific to your scooter model will provide the best guidance. It's essential to ensure you identify the correct wire to avoid damaging the electrical system. If you're unsure, consider consulting a professional mechanic or the manufacturer's documentation for assistance.
No, I have done before it totaly doesn't ruin it it actually helps go ton faster!!!
Cut the blue wire that goes into the actual motor
I have a 49cc korean scooter. Under the bike in front of the muffler there are colored wires. My bike has an all BLUE wire -- It needs to be cut. Once cut my bike got an extra 10-15 mph (top speed now 45 vs. 30). I was in Martha's Vinyard and went to a scooter rental place that had my particular scooter. The expert there showed me how to do it. VERY EASY and EFFECTIVE. Once the blue wire is cut you need to add a little bit of 2-stroke oil to each tank of gas due to the higher rev speed.
Cut the wire or take it off.
Oh, dude, taking the governor off a 50cc gas scooter engine is like asking for trouble. It's like saying, "Hey, let's see how fast I can make this tiny thing go!" You'll probably void the warranty, mess up the engine, and end up zooming down the street at a whopping 25 mph. But hey, if you're feeling rebellious, just Google it and follow some sketchy YouTube tutorial.
You Should Cut The Yellow Wire! : D
what wire do i cut on a cdi box on a schwinn scooter 49.5cc
Sounds like a fuel system problem. You may need to clean and/or rebuild the carburetor.
first u cut the red wire then blue then the green right by the blue wire
cut the blue wire and do what you gotta do then run. cut the blue wire and do what you gotta do then run.
Cut the solid blue wire
Because it is limited by the CDI. The CDI is a small black box with 4 -6 wires running to it depending on the model. If you have an Asian made model chances are its a 6 wire. Find the CDI and look for a pink wire. Cut it a use electrical tape to cover the ends. That's all. Also, search for derestricting 50cc scooters.