On a 1991 Suzuki Intruder 750, the oil drain plug is located on the bottom of the engine's oil pan. It is typically a hexagonal-shaped bolt that can be accessed from beneath the motorcycle. Make sure to place a drain pan underneath to catch the old oil when you remove the plug. Always consult the owner's manual for specific details and torque specifications when re-installing the plug.
what kind of oil filter do I need for a 86 susuki intruder 750
What is the spark plug gap for a 1996 suzuki gsxr 750?
The drain plug on a 1981 Virago 750 on the underneath part of the radiator. You will need to remove a bolt to drain it.
It is under the chrome radiator cover.
The 1979 Suzuki 750 spark plug gap is .018. Most spark plugs will come pre-gapped from the spark plug manufacturer.
Remove the plug on the bottom of the oil pan. Allow the motor oil to drain out. Replace the plug to its original position. Fill the motor with oil.
An 03 Suzuki gsxr 750 is a dirt bike. This type of dirt bike has only one spark plug in the motor.
To change the oil in a 1978 Suzuki GS 750, first ensure the bike is on a level surface and warm the engine slightly to help the oil drain. Remove the oil drain plug located beneath the engine and let the old oil fully drain into a container. Replace the drain plug, then remove the old oil filter, installing a new one afterward. Finally, refill the engine with the recommended oil type through the oil filler cap, checking the oil level with the dipstick to ensure it’s filled correctly.
Start bike and allow it to warm up. There is a large drain bolt beneath the engine crankcase. Remove the drain bolt and the oil will evacuate the crankcases. Reinstall the drain bolt. Remove the oil filter located on the front of the engine cases. Install a new filter. Bike will hold 3 quarts when changed with the filter.
PLUG GAP SHOULD BE 0.6-0.7MM.BEST PLUG IS AN NGK D9EA. PLUG GAP SHOULD BE 0.6-0.7MM.BEST PLUG IS AN NGK D9EA.
0.7 - 0.8 mm (0.028 - 0.031 inches)
Its on the very bottom f the bike to the left of the pedals.