0
It is located on the lower front right side of the engine. Follow the oil cooling lines to the engine. undo the three Allen headed screws holding the cover on and you will find it under it. It is not a high micron filter rather a debry filter. That is why it is really important to chonge the oil atleast anualy. It will take you about 3.5 quarts to do a oil change. Be sure to use a motorcycle oil like Yamalube and not automotive oil. The reasion for this is that the wet clutches (they are submerged in the engine oil) will pematuraly wear out and you slip.
What else can I help you with?
How much oil does a Yamaha big bear 400 hold?
The oil capacity for the Yamaha Big Bear 400 is 3.2 quarts. It is recommended you use 10w30 oil in the Big Bear.
Where is the gas filter on 400 Yamaha big bear ATV?
On a 400 Yamaha Big Bear ATV, the gas filter is typically located in the fuel line, near the carburetor or fuel petcock. To access it, you may need to remove the seat and fuel tank, depending on the model year. Always refer to the owner's manual for specific guidance on your ATV's configuration.
What weight oil for Yamaha big bear 400?
yamalube 10w30
What type of oil filter goes on a 2004 Yamaha Big Bear 400 ATV?
According to K&N's web site, this vehicle uses an ADKN142 K&N filter.
What is the oil capacity on a 2000 Yamaha big bear 400?
3.2 quarts
What year model is a Yamaha Big Bear 400 with VIN 5y4ah06w5ya002834?
1999
Where is the serial no on a Yamaha big bear 400?
on the left frame in front of the engine.
Where can one learn more about the Yamaha Big Bear 400?
If one is interested in learning about the Yamaha Big Bear 400 the best place to go would be to the Yamaha website. The individual(s) could also go to their local Yamaha store in their area and the salesmen there could share a wealth of knowledge with them on this topic.
What are the head torque specs on a 2006 Yamaha big bear 400?
58 foot pounds
How do you set the idle on a 2003 Yamaha Big Bear 400?
To set the idle, adjust the carburetor.
What is the spark plug gap for a Yamaha big bear 400?
The spark plug gap for a Yamaha Big Bear 400 should be set at .024 inches. A new spark plug may be purchased at an auto parts store with the gap preset.
Where is the VIN number on a Yamaha big bear 400 ATV?
On the steering shaft stamped on an aluminum plate
