There are many.
PTO.
Seat.
HYD drive peddle.
Neutral.
To check the safety switch on the starter of a Kubota tractor, first ensure the tractor is in neutral and the parking brake is engaged. Locate the safety switch, typically near the starter or under the operator's seat. Use a multimeter to test for continuity; if there is no continuity when the switch is engaged, it may need to be replaced. Additionally, inspect the wiring for any damage or loose connections.
Make sure the tractor is out of gear, press down on the clutch all the way down as it has a safety switch. Make sure the PTO lever is in the up positionas this also has a safety switch. Turn the key and she should start. If its cold turn the key, anticlockwise to give it some pre-heat for about ten to 20 seconds depending on the weather.
A safety switch is used just 2 be safe
If it is an automatic it will not have a clutch safety switch it will have a neutral safety switch
where is the neutral safety switch on gm safari
DO YOU MEAN THE NEUTRAL SAFETY SWITCH?
Vakavtchiev and Violin invented the neutral safety switch.
Switch it.
Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.
How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?
Seat switch; it does not know the seat is occupied.
Where is the neutral safety switch on a 2003 trailblazer?