walk to the right side of the bike. lay down and look underneath the bike. You will see an oil pan just behind the engine and just below the tranny. the engine oil drain plug is at the front and the tranny plug is facing you and about half way of the pan
The oil drain plug on a 2000 Electra glide is under the oil pan towards the front of the engine. Make sure that you remove this plug instead of the transmission drain.
The drain plug is located at the bottom of the oil tank, which is located behind the plastic sidecover on the right side of the frame.
Under the right side cover in front of the saddle bag.
The oil drain plug on a Harley Davidson 003 Dyna Wide Glide is located on the left side of the oil drain pan. The right side contains the transmission drain plug.
The drain plug on a 2005 Harley-Davidson Electra Glide is located on the bottom of the oil pan. To access it, you'll need to look underneath the motorcycle, towards the rear of the engine. It's typically a hex or socket-head bolt that you can remove to drain the engine oil. Always ensure the bike is on a level surface and allow the engine to cool before performing any maintenance.
Ride until motor is at operating tempature. Remove filler plug. Locate oil drain plug at front left side of oil pan. ~RC@HD~
On a 1995 Harley Electra Glide Standard, the oil drain plug is located on the bottom of the engine's oil pan. It is typically a hex bolt, and you'll need to use a wrench to remove it for oil changes. Ensure the bike is on a level surface and that the engine is warm but not hot to facilitate drainage. Always use a suitable container to catch the old oil.
the drain plug is on the left front corner of the transmission pan
On a 2000 Dyna Glide, the transmission drain plug is located on the bottom of the transmission case. It typically has a hex head and can be accessed from underneath the motorcycle. Make sure to use the correct size socket or wrench to avoid stripping the plug. Always check the owner's manual for specific details and torque specifications when performing maintenance.
There are two drain plugs on the oil pan. The one on the bottom, plugs a tube through the oil pan straight up to your transmission. (that would be the tranny plug) The other one is the one you want. It is located on the front of the oil pan at the bottom. Instead of comming straight down the oil should come out horizontal.
The oil drain plug on a 1999 Harley Electra Glide Standard is located on the bottom of the engine oil pan. It is typically a hex-shaped bolt situated toward the rear of the bike, near the center of the pan. You'll need a socket wrench to remove it when draining the oil. Always ensure the bike is on a level surface and allow the engine to cool before starting the oil change process.
The transmission drain plug on a Harley-Davidson Dyna Wide Glide is typically located on the bottom of the transmission case. It's a hex-headed bolt that can be accessed from beneath the motorcycle. Make sure to use the appropriate tools and take precautions to catch any fluid that drains out. Always refer to the owner's manual for specific details and torque specifications.