there is only one clutch and that is on the left handle bar
is it a automatic clutch such as electronic shift
all you have to do is lean backand pop clutch before u hit it
Shifting into first gear 1. Make sure the four-wheeler is in neutral.2. Hold the clutch in and shift down. 3. Give the four-wheeler some gas and slowly let go of the clutch.Shifting into second gear 1. When you hear the four-wheeler about to over-rev, let go of the gas and hold the clutch in. 2. This time you shift up a gear to get into second. 3. Slowly let go of the clutch and give it gas. Shifting into third, fourth and fifth gears 1. Shifting into the three gears is just like shifting into second. 2. Hold the clutch in, 3. Release the gas. 4. Shift up until you reach fifth gear.Stopping and shifting to neutral 1. When your stopping, hold the clutch in and press on the brake. 2. When your completely stopped, shift down as many times as you can 3. To make sure your in neutral, let go of the clutch 4. If the four-wheeler dies, you're not in neutral 5. If the four-wheeler stays running, you're in neutral If you're in neutral, turn the four-wheeler off
No it has an auto clutch.
you need to find out where the clutch releases at when you find that. you should give an equal amount of gas as you do let out the clutch it takes practice
its 12 v
Your mom invented the four wheeler ;)
can i put my vin number of my four wheeler on my four wheeler key
i have hoffman four wheeler what brand is it.
There are seven steps on how to replace/change the gears in the rear end of a Polaris 325 4x4 four wheeler. Some of the step-by-step instructions are turn the ignition key on, pull in the clutch, and then push the shift lever down four times.
Four Wheeler - magazine - was created in 1962.
How Many Main Parts Of Four wheeler