0
Why is a 24hp briggs and stratton intek engine difficult to get the motor to turn over at times?
The rocker arm clearance tends to loosen in these engines.
This causes too much compression at the wrong time resulting in hard starting.
Most people think the battery is weak but a relatively simple adjustment of the
valve/rocker arm clearance should solve your problem.
Check your manual and YouTube for instructions or consult your local mower shop.
What else can I help you with?
Fram oil filter for a craftsman ys4500?
For a Briggs & Stratton Intek engine "PH8170"
Scotts Briggs and stratton intek 6.5?
scotts intek 6.5 starter cord replace
How much oil in Briggs and stratton 18.5 hp intek engine?
48 oz oil capacity
What is the spark plug gap for Briggs and stratton 5 hp engine?
try .030 unless it is an Intek OHV and then 0.020"
What oil goes in to a intek 6.5 Briggs and stratton?
SAE 30
What is the spark plug gap for a Briggs and stratton Intek 20 HP?
0.030
Where to get a Manual for craftsman 24 front tine tiller 5.5hp Intek Briggs and Stratton Engine?
With a model number , try the link below.
How do you adjust valves 21 hp Briggs stratton intek v twin?
Valves 21 hp Briggs and Stratton Intek V Twin can be adjusted by increasing the torque on screw band with a right rotation. This can eliminate some leaking problems.
What is the spark plug gap for Briggs and stratton 21 hp intek v-twin?
0.030"
How do you adjust valves on 16 hp Briggs stratton intek single cylinder motor?
Even though an Intek is not shown, it would be the YouTube video below.
How do you repair carb on 18 hp intek Briggs and stratton?
Try this site: http://outdoorpowerinfo.com/repairs/
What is the compression reading for a Briggs and Stratton intek v twin?
It needs at least 70 psi to run.
