whenever water is mixed with oil in a crankcase the heat turns the water into a vapor and this allows oil and water to mix and that is the milky looking substance you see... check for cracks or bad gaskets if the motor is water cooled and buy a dryer agent if it's not... it could be just condensation but enough of that will damage your motor real bad... it lowers the viscosity of the oil and that can lead to big problems!
Condensation of moisture mixed with the oil film inside the cap. If oil in oil pan is not "milky" you are ok.
Overheating is usually caused by a bad head gasket. Check under the radiator cap for oil or milky reside. Check under the oil cap for water or white milky residue.
if the build up you are talking of is sludge, it could by caused by coolant mixing with the oil. The intake's are prone to leak on the Chevy line and it will let the coolant leak to the inside as well as to the outside. Look in the oil filler cap for a white milky looking goo, if it is present you have problems.
That would be moisture in the oil.
one sing can says a lot: check in your oil cap, if you find some oil sludge, its a big revelation that you have oil sludge problem in the engine
Oil and water do not mix. oil will float on top of coolant if you remove radiator cap this will be very visible, on the other hand coolant in oil will look milky white.
Yes, sludge in a motor can lead to white smoke. Sludge often indicates that oil is breaking down due to overheating or contamination, which can cause improper combustion. When oil leaks into the combustion chamber, it can produce white smoke as it burns off. Additionally, sludge can block oil passages, leading to insufficient lubrication and further engine issues.
somehow you have got water in the crankcase. this can happen if tractor is parked outside in rain.the raqin can enter thru upright exhaust and seep into oil pan. dump the oil and put new oil and oil filters in. the sludge on oil filler cap is condensation of oil and water created when engine is at running temp. from the water in the oil pan. changing oil will remedy this.as you said no running problems and clear exhaust, this is not a head gasket problem a hint for you,is to place and old can upside down over the exhaust when parked out in the weather.this will keep moisture and rain out of the engine,not to mention the blck crap that will shoot out when you start engine
Check the oil dipstick. if it is milky white that is evidence of water or moisture. also remove the oil fill cap from the valve cover and look for moisture
you have a blown head gasket . you have ran the car way to hot , and now you have water mixed in with the oil....
check operation of choke. if choke is sticking on that would be the reason. failing that, check oil in engine for milky look indicating coolant in oil,and check radiator for sludge indicating oil in coolant. excessive white smoke usually indicates a blown head gasket.
If there is a lot of it, it is a clear sign of a blown head gasket. If it's just around the lip of the filler cap, it is only condensation and nothing to really worry about.