answersLogoWhite

0

Additionally information-

new crush washer used

not overtorqued/pan not stripped

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What happens if you dont install a drain plug washer?

A drain plug washer is not necessary unless you have oil leaking from the drain plug.


What causes an oil leak underneath the body in a 1992 Mazda mx3?

A leaking gasket, a leaking filter, or a leaking drain plug....


What to do when oil is leaking from the drain plug on your 1996 Harley Davidson Dyna super glide?

Replace the "O" ring on the plug next oil change.


Where is the oil drain plug on a 2002 road king?

The oil drain plug on a 2002 Road King motorcycle is near the kick stand lever. Look for a bolt that is sticking out in a horizontal position.


How do you replace a leaking drain plug on a 1999 sebring jxi?

Oil drain plug or radiator? Buy a new plug at any auto parts store . Bring in the old plug to compair size.


Where is the oil drain plug on a 2002 road king motorcycle?

hello...where is the oil plug located on a 2002 Harley Road King Classic? *this bike is new to me...


How do you change the oil on a motorcycle?

Should have a drain plug either at bottom of engine or at lower end of oil reservoir


How do you change motor oil on Honda xrm 125?

In order to change the motor oil on a Honda XRM 125 you need to lift the bike on a motorcycle rack. You then need to unscrew the drain plug, let the oil drain out, put the drain plug back in, change the oil and put new oil in.


Oil pan drain plug leaking on 2001 Cherokee?

Probably just the gasket on the plug (if it's tight). Make sure the plug isn't stripped.


How do you change the oil on a 2005 Road King motorcycle?

Pull the drain plug at the bottom of the oil tank under the tranny, refill on the right side filler plug.


Why is your 2005 GSXR is leaking oil after an oil change?

double gasketed or over tightened oil filter, over tightened or stripped drain plug


My 2007 Santa Fe oil drain plug is leaking?

You probably did not use a new washer when you changed the oil , remove the plug and install the new washer to it then torque the plug to recommended ft/pounds.