0
What else can I help you with?
Craftsman riding mower that shuts off when you put the blades up?
If you are saying that the mower shuts off when you engage the blades (or put the lever for the blades in the up position) then the most common problem is a bad seat safety switch. This is located under the seat. It has two wires going to it.
How do you get your riding lawn mower blades off?
have u tried looking in the manual
Why won't engine start after engine stopped with blades engaged this is a john deere riding mower.?
Turn your blades off.
Craftsmn model 917.273639 rider mower will start and run until you release the brake clutch or engage the mower deck switch What part do I need to fix this problem?
There's a safety switch under the seat. It will shut the tractor off if you get off the machine while the blades are engaged. It's not sensing your weight thinking you have fallen off the tractor.
How do you start blades on John Deere lx178?
There is a nice Yellow Knob on the right hand side of steering wheel when you pull it out your PTO(Power Take Off) part that makes blades engage when hooked up right. To shut blades off just push know back in. Hopefully that helps and good luck with the mower. I have had mine 10 years it has never once had an issue.
Which way does the bolt turn to take off the blades of a murry riding lawn mower?
counterclockwise
Why does your craftsman riding mower die when you start the blades or let off the brake?
If your Craftsman riding mower dies when you start the blades or let off the brake, it could be due to a few reasons. A common issue is a faulty safety switch, which prevents the mower from operating under unsafe conditions. Additionally, it could indicate a problem with the battery or electrical system, such as a weak battery or loose connections. Lastly, an overloaded engine due to dull blades or excessive debris might cause the mower to stall when engaging the blades.
How do you changr mower blades on a lt1050?
To change the mower blades on a John Deere LT1050, first, ensure the engine is off and the key is removed for safety. Tilt the mower onto its side or raise it securely, then use a socket wrench to remove the blade bolts, turning them counterclockwise. Carefully take off the old blades and replace them with new ones, ensuring the blades are oriented correctly with the sharp edge facing down. Finally, tighten the bolts securely before returning the mower to its upright position.
Is there a way to sharpen the blades on my riding lawn mower for a cleaner cut?
To sharpen lawn mower blades, carefully unscrew the blades from the machine. Use a putty knife to scape off any residue. Then take a medium file and stroke the edge of the blade evenly.
Why does your yardman riding lawn mowers belts squeal and engine shuts off when blades are engaged?
More than likely you either have a bearing seized up in one of the deck spindles, a bent blade that is in a bind or debris on the underside of the deck keeping the blades from turning. If this is the first time it has been used in a long time, with the mower off, work the blades back and forth by hand until they move freely then start the mower and try to engage them. If they do not start to move freely then you will have to figure out which one is not turning and take it apart.
Why did john albert invent lawn mower blades?
He wanted to cut his head off in a sophisticated way...
How do you know when riding mower deck spindles are bad?
Normally you will start to hear a loud grumbling sound from underneath the mower when the blades are engaged. With the mower shut off, release the tension from the belt for the blades. Raise the deck so you can grab the blades from the bottom. You should not be able to rock the blades from side to side or up and down. If you can then you probably have a bad spindle. You can do this for wach of the spindles to check them all.
