carb. adjustment, fuel filter or the engine is shot.
The 14.5 hp ohv Briggs & Stratten engines require a 0.30 in gap
Husqvarna makes it. Briggs&Stratten Platinum engine. General Transmission Element V transmission.
Front of the engine screwed to the carburetor
To change the needle and seat on a 6.0- hp Briggs Quantum engine, you will need to first locate the carburetor. Remove the carburetor from the engine, then disassemble it to access the needle and seat. Replace the old needle and seat with new ones, then reassemble the carburetor and reinstall it on the engine.
Engine will overheat and engine will probably sieze
It is a Briggs & Stratton Engine, so get the engine model and try jackssmallengines.com.
A Briggs and Stratton L head twin engine wills pit gas out of the carburetor and flood out when starting if the diaphragm has been damaged. This will cause excessive fuel to enter the carburetor.
My engine is idling too high. How do I adjust the idle speed?
with a big freagin hammer
Because your carburetor is not getting fuel to the engine - could be a plug in the fuel line or it could be dirt in the screen in the pick up tube in the carburetor. I would suggest you clean the carbutator.
Clean out the carburetor with gas, the reason it wont keep running is its not getting enough gas through the carburetor.
Carburetor probably needs to be disassembled and cleaned.