No it wont due to the keyway location which knocks out the timing. The crank will fit into the 80cc engine but you will battle with the timing which will run the engine in reverse. The 85cc conrod and big end pin fits the 80cc crank
if your oil is grey in your rm 80 then i suggest you best change it right away or else it will mess up your crank and your rod because you are suppose to change the oil in motocros bikes after about a month
Rod Streater is number 80 on the Oakland Raiders.
One rod is 16.5 feet. Multiply that by 80, the answer is 1320.
80
80 is Barboach and can be caught by using the good rod and fishing on route 208.
PW 80 is a 2 stroke. It does not have oil in the crank case. I think you mean transmission oil. I use 10w40 engine oil in mine and it works great.
80 rod or 1320 feet (1 rod = 16.5 feet)
Pokemon number 80 is: Barboach. It can be found on route 208 by fishing and using the good rod.
80
The Torque specs for a 1992 Jeep Crank with bearing caps is 80 ft./bls. You will need to check your chiltons.
it's barboach. You can get it by battling or fishing it with a super rod.
On a Z-31 (80's) model there is one.....inside of the distributor