It is a safety feature. You must pull in the left brake lever fully to engage reverse, if you try to put it into reverse without doing so, the engine will kill.
My Yamaha Blaster stalls when I engage the throttle, what should I do?
yes it can be true. try not applying the engine and apply the switch to left for run. then give gas. if it is electric start and it still doesnt start ask a local mechanic to unclogg the carbrater fuel septers.. if u have a pull start get a new spark plug
A car might stall when shifting from park to reverse if the idle is set too low. It is also possible that the engine stalls because it is not fully warmed up before shifting from park to reverse.
Why engine stalls on 1993 Chrysler Intrepid while driving and sometimes at stops?
Sounds like a torque converter lock up solenoid.
Check for vacuum leaks.
The light comes on when the car stalls because the engine is not running and the pump therefore is not pumping. The pressure will always be 0 when the engine stalls and the light is directly related to pressure. This is normal, you have no problem, other than the engine stalling.
If a car engine stalls when turning, there could be a problem with the power steering pump. There could also be an issue with an emissions control device.
The idle speed needs adjusted upward if an engine stalls when you take your foot off the accelerator while stopping or turning.
i have a 2000 dodge work van 318 engine when i start in the morning it stalls several times until it warms up then ok
clutch switch is bad
The engine stalls and will not restart.