Yes, but the valves would be 1.88/1.60 and they would have less flow. You could use 318/340/360 heads on any LA small block. The only problems would be compression due to bigger combustion chambers in 340/360 heads than in 318 heads. Do a valves job and resurface the 340 heads.
In 1971, the 340 came with the J heads and 2.02/1.60 valves. Since 1971 saw the introduction of the "360 style" J head, they used the same casting for 1971 340s and 360s, with different machining for the different sized valves. The 360 head actually saw first limited use in the 1970 340 Six-Pack AAR/TA, which also had 2.20/1.60 machined heads. Also the "J" heads can be machined for the big valves.
Yes with the 2.02 heads the 273 will run good for a small engine
there is no adapter. vortec heads were cut at a diffrent slope than standard sbc heads. you can swap the heads on the 78 350 for vortech heads or get a multipoint fuel injection intake for a 85 - 95 350. you can get the intake from summitracing.com You will have to swap the heads and the intake
Its a Fly
you would have to change the heads and timing cover no you dont have to swap heads or timing cover! it is a direct swap! motor has been in the lumina for about a month now its running great!
about 150hp. same as an '88 town car i had. you can get the mustang heads and swap them out to get about 225hp or so about 150hp. same as an '88 town car i had. you can get the mustang heads and swap them out to get about 225hp or so
Buy 2 xbox 360s and put a cable between them.
they should work fine as it's basically the same engine.
All 360s can connect as long as you have the correct items to connect to xboxlive
auto swap meets you can find ads and manuals and look on you tube for old commercials.
thier the same block and heads just different bore and stroke.
Yes
£200 / $300