answersLogoWhite

0

The actual engine wiring will need modification and adptation. But overall the original harness will be reuseable as long as it is in good shape.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Can you swap a92 350 for a vortech?

You can, as long as you change the complete wiring harness, Computer, Fuel pump with 1 that will operate the VORTEC engine.


What does it take to swap a 1995 vortex v-6 into a 1993 C1500 Chevy?

the 95 and the 93 full size pick ups are identical there should be no need to swap parts the 95 vortec from an S-10 will need the entire intake manifold, exhaust, sensors, and wiring harness from the 93 to make it run


Will a 2004 Jeep liberty 2.4 swap with a 3.7?

It is not a direct swap. The wiring, computers, plumbing, etc are different.


Do mounts need to be changed to swap a 5.3l vortec in for a 5.0l tbi?

should be the same mounts as they are both small blocks.


Can i swap a 1997 Sunfire 2.4 with a 1997 Sunfire 2.2?

yes as long as u swap the wiring and the computer too


Will heads off of a vortec work on your 1993 5.7 with out changing the manifold?

NO, you need to use a Vortec manifold, tons available from Summit Racing, and the forums at full size chevy have great info on the swap, detailed....


Can you swap a 1994 blazer vortec engine with 1998 S-10 pickup?

Not easily. You have two completely different fuel systems.


Can you put a 1995 4.3 vortec in a 2001 Blazer?

It would not be a bolt in and go swap. They have entirely different fuel injection systems.


Can you swap your 1987 Chevy s-10 2.8L for a newer 4.3L vortec?

No if you want to use the same transmission. They have different bolt patterns.


How do you swap a V8 for a V6 in a 1980 El Camino?

Pull the v8 out and get some 6 cyl. motor mounts and drop the 6 in.


Can you swap a 7.3L diesel engine for the 7.6L gasoline engine on a 1989 E350?

If you know anything about this subject I would like to know.I am looking to do this swap in an 94 e350. Motor mts. need swapped and I am looking to go with a c 6 w/ minimum electronics and a carburator.


Is there an adapter for this I Want to put a 78 350 into 96 Tahoe but intake is vortec is there an adapter or different intake that you can get?

there is no adapter. vortec heads were cut at a diffrent slope than standard sbc heads. you can swap the heads on the 78 350 for vortech heads or get a multipoint fuel injection intake for a 85 - 95 350. you can get the intake from summitracing.com You will have to swap the heads and the intake