0
The answer is YES & NO !
1. Simply because there are 2 popular modes of the Component systems
Progressive vs. interlaced component video
2. One will work and the other will create a distortion/interference since the signal is strong and that is why a 75 ohms coaxial is used.
3. we had several incidents when we connected a DVD player to a TV, one time it was perfect, another we get a distorted, another we got a fuzzy black and white result, but the most severe case was when we burned out a satellite receiver (it happened at the same time we were connecting)
Personally, I believe try it as a stand alone without any other device being connected to the TV.
4. This should not be an issue with top brand peripherals
What else can I help you with?
How do you hook up a DVR when you have a satellite TV box?
The following procedure may vary, depending on if you have Dish Network or DirecTv. Connect one or two tuners to the "satallite in" on your DVR. Two is necessary in order to record two shows at once. Then, if you are working with standard definition, connect a yellow composite cable as well as two RCA audio cables to the TV and DVR. If you are working with High Definition, connect a set of component cables (blue, green, red) as well as two RCA audio cables to the DVR and TV. Also, you can connect an HDMI cable to the TV and DVR, which allows for HD video and audio to your tv with one cable. For more info on these cables and what they do, go into your local electronics store. Hope this helps and good luck!
AV cables definition?
"A/V cables" (or any variation thereon) means audio/video cables. These cables carry sound and picture within the home for almost all home-entertainment equipment, such as televisions, VCRs, and DVD players. They are even used directly or with a plug adapter by other devices such as video cameras or game machines. Until recently, the nomenclature referred only to the set of three A/V cables with one for picture (video), and two for stereo sound (audio). These cables are of the shielded type, terminated with a male connector, called a phono plug or RCA plug, on each end. The carried signals are all analog; the video signal carried is called composite video. Cable manufacturers color-code the cables or the connectors as follows: yellow for video, red for right-channel sound, and black for left-channel sound. But with the arrival of newer means of and standards for carrying sound and picture over wires, "A/V cables" can refer to any combination of wire types carrying sound and picture. Some other standards and technologies are S-video, component video, digital audio, digital optical audio, DVI video, and HDMI audio/video.
What are the Disadvantages of fiber optic cable?
It's very expensive, and difficult to splice two cables together.
What is the role in electronics of a cat 5 cable?
A Cat 5 cable is an Ethernet cable, used in computer networks. Cat 5 cables are designed for high signal integrity, and can carry two separate telephone lines.
What are the two parts of an audio connector?
The two parts of an audio connector are the jack and the plug.
Does one HDMI cable from your tv to your cable set top box handle both the video and the audio or do you still need two separate cables like you would using component cables?
HDMI cables carry both video and audio. You only need one.
What are those cords called ..The colored ones that you connect to your television for video and audio to work?
They can be called A/V cables and ones for HDTV are called component video cables. They all have RCA type plugs and the yellow is video and the red and white are audio on A/V cables. Component Video cable have two additional cables for HD Video signal besides the yellow one.
Component Cable?
Component cables do not carry audio signals. However, you will find that they are bundled with audio cables most of the time. These are usually cheap products, varying from about 5 to 10 dollars. Don't be fooled by "gold plated" or any metal plated cables, because they all work the same, without loss of quality for cheaper ones.
How do you hook up a DVR when you have a satellite TV box?
The following procedure may vary, depending on if you have Dish Network or DirecTv. Connect one or two tuners to the "satallite in" on your DVR. Two is necessary in order to record two shows at once. Then, if you are working with standard definition, connect a yellow composite cable as well as two RCA audio cables to the TV and DVR. If you are working with High Definition, connect a set of component cables (blue, green, red) as well as two RCA audio cables to the DVR and TV. Also, you can connect an HDMI cable to the TV and DVR, which allows for HD video and audio to your tv with one cable. For more info on these cables and what they do, go into your local electronics store. Hope this helps and good luck!
How many pins do RCA cables have?
RCA cables may vary depending on their intended use. For example, the most common type of RCA cable includes 3 pins on each end. These pins are divided into audio (2) and video (1). The two audio pins transmit the left and right stereo audio channels while the yellow marked pin carries the video signal. Other common configuration is to have separate cables for audio and video. In this case, the audio cable will be divided into two for the left and right audio while still being a single cable, and the yellow cable will carry the video feed.
How can I connect two steel cables together?
To connect two steel cables together, you can use a cable clamp or a cable splice. A cable clamp is a metal device that wraps around the two cables and is secured with bolts or screws. A cable splice involves cutting the ends of the cables and joining them together using a specialized connector. Both methods provide a strong and secure connection for the steel cables.
What is conclusion of crossover cable?
it connects two cables
Can you get cat 6 crossover cables?
Yes you can get a crossover cable for any of the Ethernet cable series on one end of the cable two of the smaller cables inside are crossed over so they are not straight through cables
How do you connect a Wii to a Samsung 7000 series Smart TV?
All 7000-series models come with two component and two composite video inputs. Using the cable that comes with the console you should be able to connect your Wii to one of the composite inputs. (These have a yellow port for video, plus a white and red port for audio. These are usually labelled as A/V or S-Video.) If you have a Wii component cable (a cable with red, green and blue connectors for video plus red and white for audio) this can be connected to the component port. The Wii does not support HDMI.
Does a Yamaha htr 5830 have HD?
I'm not sure what you mean by "HD," but I've owned this receiver for almost two years and here's what it does have - two Optical and one coax digital audio inputs - two component video inputs and one component video output these two features can be classified as HD as component video is rated just about the same as HDMI. The three digital audio inputs can be classifed as HD as well. Just remember that if you want HD quality from either a Set Top Box or a DVD player, you will need one cable for each of the video and audio. There are no HDMI inputs for this receiver. The nice thing about HDMI is that you can get both HD quality audio and video from one cable. I hope this helps
How can I connect two throttle cables together?
To connect two throttle cables together, you can use a cable coupler or a cable splitter. These devices allow you to join the two cables securely, ensuring smooth operation of the throttle system. Make sure to follow the manufacturer's instructions and adjust the tension of the cables as needed for proper functioning.
What is the yellow red and white plugs on a tv called?
Those are audio-video cables, also called AV cables. Two audio plugs, 1 video. The plugs themselves don't have a special name.
