Use two NOR gates. Tie the output of the first to both (or all) inputs of the second. A logic one at any input of the first produces a logic one at the output of the second which is a standard OR.
Logic circuit forplementation of a full adder using decoder and 2 or gate? Read more:Logic_circuit_forplementation_of_a_full_adder_using_decoder_and_2_or_gate
A switch is a means of making (on) or breaking (off) an electrical circuit.
ab+bc
this generator operates using logical function thats why is called as logic function generator
Any circuit using a capacitor will not work if the cap is short-circuited.
Logic circuit forplementation of a full adder using decoder and 2 or gate? Read more:Logic_circuit_forplementation_of_a_full_adder_using_decoder_and_2_or_gate
TTL stands for "transistor-transistor logic" and consists of using BJT's ("bipolar junction transistors") to conduct the logic for the circuit.
The advantage of programmable logic device is in terms of money. This device is cheaper rather than using microcontrollers that has to be certified before someone can use it.
A switch is a means of making (on) or breaking (off) an electrical circuit.
TTL stands for "transistor-transistor logic" and consists of using BJT's ("bipolar junction transistors") to conduct the logic for the circuit.
ab+bc
Only if you decide to work with negative logic throughout the circuit.
Flow of electricity in a circuit is controlled by using 'resistor'.
A lookup table (LUT) in digital circuits is a memory device used to implement combinational logic functions. It stores predefined outputs for specific input combinations, allowing quick retrieval of results without needing complex logic gates. LUTs are commonly found in programmable logic devices like FPGAs, where they enable flexible design by allowing designers to customize logic functions easily. By using a LUT, designers can simplify circuit design and improve efficiency in implementing complex logic operations.
by the procedure design a half subtractor design a logic ciruit to add two numbers with five bits each drawthe logic diagram of afull adder using using NAND gates only ?
Speed-Power-Product or SPP
In a circuit, the electrical line provides power to the load, which is the device using the electricity. The line carries the electrical current to the load, allowing it to operate. The load consumes the electrical energy provided by the line to perform its intended function.