0
What else can I help you with?
What will happen when you shut your action replay off when it was saving changes?
Turning off the power or disconnecting anything while it is saving may cause either: * A Rollback, not being saved or the save file being rolled back to a previous save * It may corrupt the whole file so it won't be accessible. So you're going to have to delete/replace that file for it to work again.
Why cant you save after you use the action replay on platinum?
you should be able to. If you havn't gotten to far ahead i recommend turning the game off and trying again
Slogans to save power-electricity?
If its not in use.Turn off the juice Dont be fuelish A gallon saved is $3.00 earned Save today survive tomrrow Flip it off Lets cut carbs..... Our Carbon footprints that is You have the power to conserve You can stop energy disfunction Turn off the lights dont let the bill give you a fright
Why power off when storm?
Powering off during a storm is crucial to prevent electrical surges caused by lightning strikes, which can damage home appliances and electronic devices. Additionally, high winds and falling debris can lead to downed power lines, posing a risk of electrocution. Turning off power can also minimize the risk of fires and help ensure safety during hazardous weather conditions.
How do you get a shiny garitena?
I received one from GTS By trading my level 90 Beldum... GTS only works if you Have Wi-fi.Or you can just save in front of Garitina and keep turning off and on till u find a shiny one.
How much money do you save when turning off your laptop when you are not using it?
well by turning it off you save about over 1000 volts which could power 2 lights
How do you reset canon ir3025?
To reset the Canon IR-3025, start by turning off the printer and unplugging it from the power source. Wait for about 10 seconds before plugging it back in. Then, power on the printer while holding down the "Reset" button, which is typically found on the control panel. This process should restore the printer to its factory settings.
What do you do if your laser printer is on and you can hear its fan running but it won't print?
Try turning it off then on again.
How to reset canon mg2570s printer?
1: Turn off your Canon printer. 2: Remove its power cable from the power source to ensure that your printer is disconnected completely. 3: Wait at least 30 seconds. 4: Plug the power cable back in and connect the cable to the printer. 5: Turn on the printer.
What is sequence power cycling for a computer?
A power cycle is turning off and turning back on any electronic device.
How do you reset HP f370?
To reset an HP Deskjet F380 All-In-One printer first turn off the printer. Disconnect the printer from the power source and wait ten seconds. Then, connect to the power source and turn the printer back on.
How does turning off the lights help save energy?
Turning off lights when they are not needed helps save energy by reducing the amount of electricity being used. Less electricity consumption means lower greenhouse gas emissions and a smaller carbon footprint, which contributes to energy conservation and a more sustainable environment.
Lexmark 3430 printer which will not turn off without unpluging Any suggestions?
Double-check on the power button on the printer, make sure it's not stuck. If not, unplug the power adapter from the printer. The power adapter is the black box behind the printer where the power cord is attached. Wait at least 30 seconds before plugging it back in. That should refresh the printer. Hope this helps.
How much water do you save by turning off water when not using?
over 1000 volts
How much energy can you save by turning off game consoles when you are not using them?
alot ... probably
Can you reload your heart gold save game without turning your DS off?
Yes, you can
How does it save energy to turn off lights?
Turning off lights saves energy by reducing the amount of electricity consumed. When a light is on, it continuously draws power from the electrical grid, using more energy the longer it is left on. By turning off lights when they are not needed, less electricity is used, leading to lower energy consumption and a decrease in utility costs.
