STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:
1.Prepare the materials.
2.Remove the bulb from the receptacle.
3.Unscrew the screw in the receptacle using a screw driver.
4.Extend the cord of a wire using pliers.
5.Connect the cords of the wire in between the loosen screw and the receptacle.
6.Put the bulb again on the receptacle.
7.Attach the cord at the end of both batteries.
0.5 amps
The easiest way to control any electric current to any device is with the inline use of either a manual or electric reistate.
The electric path which starts from the positive terminal of a cell or battery ends at its negative terminal, without any break, is called closed electric circuit or complete electric circuit. The electric path,which starts from the positive terminal of a cell or battery, is broken at some point, is called open electric circuit or incomplete electric circuit.
yes it does have to be a closed circuit
complex circuit
hi bula
When you switch off an electrical circuit you tend to create a 'break' in the circuit, preventing the electric current to flow around the circuit, this can be caused by a simple switch or a break in the circuit, e.g a disconnected wire.
The electric field formula and voltage in an electric circuit are related because voltage is a measure of the electric potential difference between two points in a circuit, and the electric field is the force that causes charges to move between those points. In simple terms, the electric field creates the voltage that drives the flow of electric current in a circuit.
The type of circuit you are describing is known as a simple circuit. It consists of a power source (electric cell), a switch, a conductor (usually wire), and a resistor to control the flow of electric current.
To construct a working simple circuit, you will need a power source (such as a battery), a load (such as a light bulb or a motor), conductive pathways (wires) for the electricity to flow, and a switch to control the flow of electricity.
There is no "proper name" for an electrical diagram. They are commonly called circuit diagrams.
An electric circuit is a path in which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. Its so simple, though my friend from extraminds help me with proper answer.
0.5 amps
STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:1.Prepare the materials.2.Remove the bulb from the receptacle.3.Unscrew the screw in the receptacle using a screw driver.4.Extend the cord of a wire using pliers.5.Connect the cords of the wire in between the loosen screw and the receptacle.6.Put the bulb again on the receptacle.7.Attach the cord at the end of both batteries.
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
I guess Electric Circuit....
Voltage causes current to flow in an electric circuit.