"Channel selection is controlled by DIP switches inside the transmitter. The system is preset at the factory. Changing the channel can be done quickly by any qualified service technician. See your dealer or the Nady Customer Service Department for detals." Remember that the receivers have to be retuned as well. This is from the product manual. There are 8 different frequencies that you can select from when you purchase the system.
Alternatively, you can manually retune the ALD-800 receivers by gently and slowly rotating the internal tuning potentiometer while close (ten to fifty feet away) from an active Nady, Drake, Williams, or similar transmitter broadcasting on one of the standard Assistive Listening Device frequencies. A non-metallic (plastic or fiberglass) tuning screwdriver (wand) should be used for this purpose. Tune for the center of best reception. This will probably void your warranty, but it is not rocket science. If you retune a receiver, be sure to remove the sticker indicating the old frequency, and replace it with a new sticker, preferably inside the battery cover.
Preset channels between 72-76 MHz.
Channel AA: 72.1, BB: 72.3, CC: 72.5, DD: 72.7, EE: 72.9, FF: 75.5, GG: 75.7, HH: 75.9
As for the DIP switch settings on the Nady ALD-800 transmitter (and probably for it's twin the EO3 Personal Ear Monitor), here the settings for the switches 1 through 8 from a unit which had a factory label.
Channel AA (72.1 MHz): 1-ON, 2-OFF, 3-ON, 4-OFF, 5-ON, 6-ON, 7-ON, 8-ON
Channel BB (72.3 MHz): 1-ON, 2-OFF, 3-ON, 4-OFF, 5-OFF, 6-ON, 7-ON, 8-ON
Channel CC (72.5 MHz): 1-ON, 2-OFF, 3-ON, 4-OFF, 5-ON, 6-ON, 7-OFF, 8-ON
Channel DD (72.7 MHz): 1-ON, 2-OFF, 3-ON, 4-OFF, 5-OFF, 6-ON, 7-OFF, 8-ON
Channel EE (72.9 MHz): 1-ON, 2-OFF, 3-ON, 4-OFF, 5-ON, 6-ON, 7-ON, 8-OFF
Channel FF (75.5 MHz): 1-OFF, 2-OFF, 3-ON, 4-OFF, 5-OFF, 6-ON, 7-ON, 8-ON
Channel GG (75.7 MHz): 1-OFF, 2-OFF, 3-ON, 4-OFF, 5-ON, 6-ON, 7-OFF, 8-ON
Channel HH (75.9 MHz): 1-OFF, 2-OFF, 3-ON, 4-OFF, 5-OFF, 6-ON, 7-OFF, 8-ON
M.K.STALIN IN THE YEAR 2021
Transmit RF frequency subtract to the Receive frequency
FM means Frequency Modulated.FM stands for modulation on frequency or frequency modulation.
Mix it with a local oscillator whose frequency is (the IF frequency) away from the frequency of the FM signal you're interested in.
The frequency is 4006.
Xavier Nady's birth name is Xavier Clifford Nady.
Jay Nady was born in 1947.
Xavier Nady is 6' 2".
Xavier Nady was born on November 14, 1978.
Xavier Nady was born on November 14, 1978.
Ahmad Nady was born on 1981-12-31.
Barbara von Nady was born on May 12, 19??.
Xavier Nady is 32 years old (birthdate: November 14, 1978).
Xavier Nady was born November 14, 1978, in Salinas, CA, USA.
Irish
frequency table
Frequency is set by the supply, not by the load.