answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you set the carb on a johnson mq-12a?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why does 1 spark plug foul at idle on a Johnson outboard?

Idje nozzle carb is set too rich


How do you remove the gear shift rod on a 20 hp Johnson 1996 to change the impeller and housing?

look under carb your shift set is there remove carb then remove the 10mm bolt you may have to shift in to forward for better acess to the bolt now the gearcase can be removed


How do you set edelbrock carb?

It should be preset from the factory


How do you set your Nissan 1400 carb timing?

how to set the valve timming on a nissan 1400


How do you set the valves on a 1996 300 king quad?

carb?


How do you adjust the carb on a 2000 Honda xr100?

there is a screw on the carb. be sure to adjust while the engine is running so you can tell by the idle when it is set properly.


You have 1969 396 reman engine new carb timing set pops through carb not all the time?

I have a 1969 el camino 396 ss new holly 4bbl, timing set correctly, and sometimes gives a pop thru carb. please tell me the items to check over.


What is the setting for carburetor on Jet Ski?

On the carb on the back there is a needle and you will set that one to 15/16 and the one on the front of the carb you are going to set that one to 1 15/16 and then move it little at a time till it runs.


How do you set the points on 1972 350 Chevy with a 4 barrel carb?

Use a dwell meter to set the gap at 30 degrees.


How do you set idle speed on 1980 cadillac?

May have an idle solenoid on the left side of carb.


How do you stop 350 engine with fuel injections from idling to high?

set the idle down on the carb


How do you adjust idle speed on 1983 Monte Carlo?

there is a set screw on the linkage on the carb that will adjust it.