0
You can't and the controllers do not have an auto shut off function either. It is recommended that you remove the batteries from the controller after every use. A design fault given that the battery compartment has a screw on/off cover!
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you turn on motion controller in PlayStation move?
Push the PlayStation symbol on the controller
How do you connect a PS3 controller that's not yours to another console?
Get the PS3 controller and connect it to the other PS3 using the USB recharger. Turn the controller on and after about 10 seconds you can take it out, turn on the controller, and use it wirelessly. All of this is done while the PS3 is turned on.
How do you turn off a PlayStation move controller?
Hold the Playstation emblem and the PS3 screen will show choices chose turn off the controller and then yes. It may take you a few turns to learn how to move things on the screen using the move controller to actually learn how to move it to the turn off the controller and then to yes from no and then how to click it on the yes ( with the x button)
If your ps3 controller isn't working wirelessly what should you do?
If your ps3 controller isn't working wirelessly, then you may have to reregister it. To do this, you have to plug it into the ps3 with the special cord. If it still doesn't work, even if it is left plugged in, then you may have something wrong with your controller and you may have to purchase a new controller. You should also check the charge on the PS3 wireless controller. if you unplug a PS3 that battery is not charged it will not work. When you turn off the PS3 if you have not set the PS3 to also turn off the controller automatically in controller setting the controller will remain on and the battery will drain. The PS3 does not charge controllers when it is off.
Why does the PlayStation move motion controller change color?
It changes colour for 2 reasons. 1) When Syncing the controller it will cycle through the colours to find the most suitable colour for the playing environment. This is to enable the highest possible visibility to the PlayStation Eye. 2) When the controller is being shared, the sphere can change colour to match each user to a different colour. This enables the users to identify whose turn it is easily.
How do you turn off the controller on the sega drive reactor?
They turn off automatically after some time of inactivity. Wave the controller to wake it up again (the red light will flash).
What is used to record information from the computer onto a floppy disk?
That would be a floppy drive. Information is passed from the software and/or the operating system to the drive controller. From the drive controller, it is passed to the logic circuits on the drive and to the drive heads. The logic circuits also turn on the drive motor for an appropriate amount of time.
What happen when your PS3 controller does not turn on?
Either the controller is broken, or your battery is dead. Try plugging in your controller to the PS3 to see if it will turn on.
How do you set up a mega drive?
1: Set the Mega Drive on a flat, clean surface. 2: Plug the power adapter's 2 pin AC plug into a wall socket. 3: Insert the black DC plug on the other end of the power adapter into the 9v/DC in port on the back of the Mega Drive. [NOTE] If you have a Mega Drive Composite AV cable, go to step 4a. If you have a Mega Drive RF unit, go to step 4b. 4a: Connect the DIN plug to the back of the Mega Drive, then attach the yellow, white and red to their respective plugs on the AV In on your TV set. Turn your TV on and change the channel to AV (Also called VCR on some sets). If your TV does not have AV ports, go to step 4b. 4b: Connect the RCA lead (the long, thin cable) from the RF unit onto the RF Out port on the Mega Drive. Disconnect the antenna cable from the Antenna In on the back of your TV (If there is an antenna cable attached to your TV, it may be connected to a top box or VCR instead, this does not matter). Plug the cable from the antenna (If there is one) into the Antenna In port of the RF unit. Plug the TV Out (The short, thick cable) into the Antenna In of your TV. Turn the switch on the RF unit to 'Game' or 'Mega Drive' to play the Mega Drive, and turn the switch back to 'TV' or 'Antenna' to watch TV again. Turn on your TV. Place any working game cartridge into the Mega Drive. Turn on the Mega Drive. You will need to tune the TV to the Mega Drive. Here are some tips on how: - For newer Digital TVs, set the 'Source' on your TV to 'Analogue TV' (Also called 'ATV' on some sets). Open the TV's menu and go to Manual Tune. Tune the TV to either VHF Channel 0 or VHF Channel 1. [NOTE: If the Picture is fuzzy, try adjusting the CH switch on your RF unit to either CH0 or CH1. CH1 will work better on most newer TVs while older ones prefer CH0. If you change this switch, you will have to re-tune the TV to the channel you chose. Some RF units may not have this switch] - For most standard modern analogue TVs, go to 'Menu' and search for the Mega Drive on the VHF band. [NOTE: If the Picture is fuzzy, try adjusting the CH switch on your RF unit to either CH0 or CH1. CH1 will work better on most newer TVs while older ones prefer CH0. If you change this switch, you will have to re-tune the TV to the channel you chose. Some RF units may not have this switch] - For analogue dial TVs, turn the VHF knob to either '0' or '1', and adjust the fine tuning dial/ring until the picture is clearest (Some dial televisions have a feature called 'AFT' or "Automatic Fine Tuning'. You may have to turn this button on or off to get a clear picture.). [NOTE: If the Picture is fuzzy, try adjusting the CH switch on your RF unit to either CH0 or CH1. CH1 will work better on most newer TVs while older ones prefer CH0. If you change this switch, you will have to re-tune the TV to the channel you chose. Some RF units may not have this switch] Now that the TV is tuned, turn off the Mega Drive. 5: Plug one or two controllers into the Mega Drive, and attach any other accessories you may have to their respective ports/slots (such as a Mega CD or Multitap) 6: Insert a game cartridge into the cartridge port of your Mega Drive. If you are using a Mega CD, insert an audio disk or Mega CD CD-ROM. Turn on your Mega Drive. Remember to always turn off the Mega Drive before removing or inserting a cartridge.
How do you connect a PS3 remote to another PS3?
turn on a ps3 then turn on a controller, any ps3, any controller.
How do you keep your PS3 controller charging?
leave the PS3 turned on and change the settings to turn off the controller when the PS3 is turned off. You can turn the controller and the PS3 back on by pressing the PS3 emblem on the controller
How do you turn on motion controller in PlayStation move?
Push the PlayStation symbol on the controller
How do you turn off sixaxis?
If you are referring to the Playstation 3, Hold the PS button down on your controller and release it, then select "Turn off your Controller"
Why can't the PlayStation 3 controller turn on the PlayStation 3 system without turning it on by hand?
It can turn it on. Just press on the PS3 emblem on the Controller.
How do you connect a PS3 controller that's not yours to another console?
Get the PS3 controller and connect it to the other PS3 using the USB recharger. Turn the controller on and after about 10 seconds you can take it out, turn on the controller, and use it wirelessly. All of this is done while the PS3 is turned on.
Can you play with the controller plugged in to the PS3 console?
Yes when your controller needs to be charged you can use the charging cable and still use the controller to play the game. Always make sure your system settings automatically turn off your controller when you turn off the PS3. Remember the PS3 will not charge the controller when it is off.
Does Xbox Kinect controller have wireless capability?
It does have wireless connection. It has no controller. The only part you need a controller is for when you first turn your Xbox on. It is so good that you dont need a controller.
