That gives you 18.5 amps.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
Ohms does not equal watts. You need to know what voltage is across the resistor to determine how many watts it is drawing or how many watts the resistor should be rated for.Power is the voltage across the resistor SQUARED divided by the resistance. If this 4 ohm resistor has 12 volts across it then the watts power is (12 x 12) / 4 = 36 watts.1 Watt equals 1 Volt times 1 Amp.
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
The answer is "It Depends" Watts of electircal power is defined as Voltage x Current. Amperage is a unit of current. In most houses in the US the voltage is 120 volts AC. A 100 watt light bulb in the house would have 120 volts across it so the current flowing would be: Watts = Volts x Amps 100 watts = 120 volts x I amps A amps = 100 watts / 120 volts A amps = 5/6 amps ANSWER watts is a product of voltage and current .One quantity will never suffice
It depends on what kind of charger your talking about. Im assuming some type of smart phone charger... typically about 5.1 volts at .8 to 1 amp.... current ( amps) times voltage equals power (watts) so.. around 4 to 5 watts
watts = volts x amps, example-2 watts=2 volts x 1 amp, example- 2 watts=120 volts x .60 amp.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Power (in watts) is equal to voltage (in volts) multiplied by current (in amperes). Therefore, the number of watts in one amp depends on the voltage. For example, at 120 volts, one amp is equal to 120 watts.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
The answer is 40,000 divided by 415 or 96.38 Amps. Watts is volts times amps.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
Use this formula Amps = Watts/Volts.
1840
volts times amps equal watts. So 12 volts times ? amp equals 1.5 watts. The current is 1.5/12 amps, which is 1/8 amp.
You need the formula: Amps * Volts = Watts But you get to do the math.
This will still only produce 12 volts. It will produce 1200 watts. watts is the result of Volts times Amps.
To calculate the amperage, you can use the formula: Amperage = Watts / Volts. Thus, for 10,000 watts at 240 volts, the amperage would be 41.67 Amps.