The question doesn't make sense. Watts are the product of volts and amps so you could have 1 V with a current of 1 amp = 1 watt or 10V and a current of 0.1 amps = 1 watt or 100V and a current of 0.01 amps = 1 watt etc.
In order to figure watts (or power), you have to have 2 values to go off from. Using Ohms law, you would multiply amperage times volts to get watts.
For instance a 12 volt circuit drawing 2 amps would consume 24 watts of power (12*2=24).
A 60 watt light bulb powered by 120 volts in a house would draw .5 amp of current (60/120= .5).
A device in the house drawing 2 amps of current would consume 120 watts of power (2*120 = 240).
A 1500 watt toaster in the house would draw about 12.5 amps. (1500/120 = 12.5 amps). So a toaster in a house should be on a separate circuit that is fused for 15 amps.
For further information punch in "Ohms law" in a search engine.
Ohms does not equal watts. You need to know what voltage is across the resistor to determine how many watts it is drawing or how many watts the resistor should be rated for.Power is the voltage across the resistor SQUARED divided by the resistance. If this 4 ohm resistor has 12 volts across it then the watts power is (12 x 12) / 4 = 36 watts.1 Watt equals 1 Volt times 1 Amp.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
This question does is not answerable. A watt is a volt times an amp. With out knowing how many amps the bulbs use there is no answer.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
The same number as 250 oranges is apples. A watt is a volt times an ampere.
One volt is zero watts.
Watts = Amps X Volts Grab your calculator!
Ohms does not equal watts. You need to know what voltage is across the resistor to determine how many watts it is drawing or how many watts the resistor should be rated for.Power is the voltage across the resistor SQUARED divided by the resistance. If this 4 ohm resistor has 12 volts across it then the watts power is (12 x 12) / 4 = 36 watts.1 Watt equals 1 Volt times 1 Amp.
Not sure about how many Watts your 36 volt charger uses, but you can find out by this formula... Volts X Amps = Watts.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
On a 120 volt supply, up to 360 watts. On a 240 volt supply, up to 720 watts.
770 watts.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
Your question answers itself... 1000 watts, when operated on a 480-volt source..
calculation for Watts is = volts X amps P=IE P= Power(WATTS) I = Current(AMPS) and E = Voltage(VOLTS). So: I = P/E and E = P/I therefore: 1 watt = 1 ampere x 1 volt If you havea 240 volt lamp that is drawing .5 amp then it is using 120 Watts
how many watts aew needed to power a 110 volt tv at 1.30 amp
On a 12-volt system 1.6 amps is 12x1.6 watts, 19.2 watts